Options
SKY + Error Code 29
[Deleted User]
Posts: 5
Forum Member
Hi All
Switch on the Sky+ today and the screen comes up with "No signal begin received" and the number 29.
Strange thing is it was working fine yesterday!
Tried switching box off and back on, but did'nt work.
Is this a fault with the box, dish or both!
Any ideas?
Thanks
Switch on the Sky+ today and the screen comes up with "No signal begin received" and the number 29.
Strange thing is it was working fine yesterday!
Tried switching box off and back on, but did'nt work.
Is this a fault with the box, dish or both!
Any ideas?
Thanks
0
Comments
Leave the box for 5 to 10 mins , then whilst re-applying the power hold down the back up button on the front of the box
All the lights on the front of the box will illuminate and If you are connected via scart you will get an on screen message " Software updating " take your finger off the back up button
When the box as DL the software it will go into standby , again leave for a few min before bringing the box out of standby
Hopefully you'll be sorted
They figured that because the boxes fail for random reasons, they would install a random number generator to match.
This also matches the random answer generator that the CSA's are taught to use during training. If a question comes up that they can't answer, they hit the button on their desktop software and "Hey Presto!"
Z
(only joking!)
No, it would seem sensible if these error codes meant something - and on this forum they could be collated so that we knew what the ***k was happening to the boxes and how best to fix them - but sadly no.
Kinda like AOL really. My AOL account is bugg*r*d (well the s/ware is anyhow) and keeps coming up with an error message when I try to connect. It connects on either the second or third attempt (sometimes taking up to 10 mins) and this is on Broadband too I might add. Phoned the techincal mupp*ts at AOL and read out the error code hoping they'd say "Oh I know what that is and here's how to fix it!" Some chance! Obviously not on Gupta's crib sheet! [/rant]
Oh well engineer will be out this Wednesday, so just have to wait and find out then, what has happened.
Turned out some ****** had been on the roof of the close and unplugged our cables from the dish and plugged their own in!!
Obviously not a really clever person then, as it wouldn't take long to work out who it was :rolleyes:
So if your ever get "No signal Received" Code 29 its a new box you need.
Try making a brew with the kettle unplugged. Would that need a new kettle??
When did he say his dish was disconnected?
DeadParrot said someone had disconnected his dish, but i never saw that said by seddsmt.
Anyway no signal is no signal. which can be caused by at least 3 things before it can even be discovered as the box.
See error codes http://www.satcure.co.uk/digirep.htm#missing
Oh, whoops, I just resurrected an old thread.