Maybe you could try reading the page you linked to!
'First, we’ll take a look at the normal Notebook Cooler. This notebook cooling pad is powered by USB and even sports a pass-through connector so you can still use the USB port into which the notebook cooler is plugged'
Maybe you could try reading the page you linked to!
'First, we’ll take a look at the normal Notebook Cooler. This notebook cooling pad is powered by USB and even sports a pass-through connector so you can still use the USB port into which the notebook cooler is plugged'
I know that that one end is called USB, but what about the other end that goes into the cooler?
Only reason why I'm asking is because I need another cable/wire because the one that I have right now is screwed.
I know that that one end is called USB, but what about the other end that goes into the cooler?
Only reason why I'm asking is because I need another cable/wire because the one that I have right now is screwed.
There is sod all information about the device that I can find. Certainly nothing that says anything about what format the connector on the cooler itself is. In any case I strongly suspect it is not an off the shelf item and is propriety to Antec.
So if there is a replacement cable available then Antec are probably your best bet to get one.
Fecking barrel connectors...I've got a 'universal' PSU that has swappable barrel connectors, and it comes with a selection of ten different sizes, and you can guarantee that the bit of kit I want to use it with doesn't take any of them.
Comments
The message you have entered is too short. Please lengthen your message to at least 5 characters.
'First, we’ll take a look at the normal Notebook Cooler. This notebook cooling pad is powered by USB and even sports a pass-through connector so you can still use the USB port into which the notebook cooler is plugged'
I know that that one end is called USB, but what about the other end that goes into the cooler?
Only reason why I'm asking is because I need another cable/wire because the one that I have right now is screwed.
There is sod all information about the device that I can find. Certainly nothing that says anything about what format the connector on the cooler itself is. In any case I strongly suspect it is not an off the shelf item and is propriety to Antec.
So if there is a replacement cable available then Antec are probably your best bet to get one.
But need to check outer/inner diameters and polarity (ie centre positive or negative)
eg
http://www.amazon.co.uk/niceEshop-3-5mm-Barrel-Connector-Power/dp/B00512Z86I
http://www.amazon.co.uk/gp/product/B003MQO96U/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=479289247&pf_rd_s=lpo-top-stripe&pf_rd_t=201&pf_rd_i=B00512Z86I&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_r=10XHFEK19W4A19BW6JTQ
Read the reviews
There is a comment on US Amazon of the niceEshop cable working with Antec cooler,
http://www.amazon.com/review/RM7TC624O813V/ref=cm_cr_dp_title?ie=UTF8&ASIN=B00512Z86I&nodeID=172282&store=electronics
Fecking barrel connectors...I've got a 'universal' PSU that has swappable barrel connectors, and it comes with a selection of ten different sizes, and you can guarantee that the bit of kit I want to use it with doesn't take any of them.