HDMI Feed
[Deleted User]
Posts: 263
Forum Member
✭
Hi gang. I'm still having some difficulties with after reconnecting my AV receiver (Onkyo TX-SR309) to my new tv (Panasonic Viera TX-L42ET5.
I use the HDMI connections on the receiver to connect back to the tv for my Vigin box
My main problem now seems to be not being able to gain any re-connection after switching the Virgin box off (overnight etc) Eg...Receiver off, Virgin box on, tv switched to HDMI 2. Result no picture or sound. The only way I can get the Virgin box to re-connect is to switch the receiver on until the picture appears. Reciever can then be switched off without any ill effects as long as Virgin box stays switched on. Then its back to square one.
I'm not sure if the problem lies with the tv or the receiver but I never had this issue with my old set.
Any suggestions would be gratefully received.
Cheers
I use the HDMI connections on the receiver to connect back to the tv for my Vigin box
My main problem now seems to be not being able to gain any re-connection after switching the Virgin box off (overnight etc) Eg...Receiver off, Virgin box on, tv switched to HDMI 2. Result no picture or sound. The only way I can get the Virgin box to re-connect is to switch the receiver on until the picture appears. Reciever can then be switched off without any ill effects as long as Virgin box stays switched on. Then its back to square one.
I'm not sure if the problem lies with the tv or the receiver but I never had this issue with my old set.
Any suggestions would be gratefully received.
Cheers
0
Comments
If it worked with another TV but does not work with the new TV then chances are it is the new TV as that is the only thing that has changed.
I've contacted Onkyo about it but have heard nothing yet.