Options

Changing boxes around?

MaisieMooMooMaisieMooMoo Posts: 1,536
Forum Member
✭✭✭
We have two tivo boxes and two v boxes and would like to change a v box for a tivo. The v box cables all came out easy enough but the aerial on the Tivo is very difficult to get out. We don't want to force it and cause damage, can anybody offer advice or help?

Comments

  • Options
    davetechdavetech Posts: 286
    Forum Member
    hi ya

    they unscrew either end, its probably quite tight, try undoing the other end, and leave the wire in place,

    the wire is the same, unless u have more length on one,

    if it the wall box, they are connected into a steel box, u could apply a little more force, with care,

    if its on the set box end, there are solid enough, but be more careful

    but as said, the cable are the same, so there is not an issue to keep them, if its stuck on the wall box,

    hope it helps,

    also always power the boxes off first, before undoing the F Connectors
  • Options
    MaisieMooMooMaisieMooMoo Posts: 1,536
    Forum Member
    ✭✭✭
    Thanks for that. Yes, it's the end that goes into the box. We tried doing it with pliars but didn't want to be too heavy handed with it, as it wouldn't budge just using hand. Hopefully we can get it to undo without breaking it.
Sign In or Register to comment.