Options
Fox T2 wiped all planned recordings yesterday.
Apprentice 2 SA
Posts: 2,342
Forum Member
✭✭✭
Anyone else have this problem yesterday.
It's worked reliably for other a year now. Anyone else had random deletion of all planned recordings ever?
I don't suppose there's a hidden 'feature' somewhere that I've accidentally pressed marked 'please wipe all planned recordings and don't put any confirmation box on screen?'
It's worked reliably for other a year now. Anyone else had random deletion of all planned recordings ever?
I don't suppose there's a hidden 'feature' somewhere that I've accidentally pressed marked 'please wipe all planned recordings and don't put any confirmation box on screen?'
0
Comments
Come on at least just warn us to retune, not just automatically do it.
Oh, and when is the antenna loop through problem on the T2000 going to be sorted.
How anyone can design a PVR without 'loop through' in standby is beyond me. I would guess the majority of customers will have a cable from a wall socket to the PVR, and a cable from the loop through output of the PVR to their TV.
The equivalent message put up by the 9200T give a lot more information and tells you what you will lose. I don't think it defaults.
The whole thing was a just tidying up exercise after the September 3rd retune - removing duplicate channels in the 700s due to mux changes and removing messages saying where some of the channels had moved.
Sorry I should have said that my PVR is a FOX T2,
I was not watching at 4.30pm yesterday, but was viewing from pre recorded media for a couple of hours in the evening. On powering up the box I saw no messages relating to retunes. In the past we have had days of warnings about retunes, what happened to these this time?
My device seems to have gone into 'auto retune' mode overnight.
Hey-ho not the end of the world, but I could have spent my time better than trying to remember what was in my schedule.
OTA is short for "Over The Air". What it actually means an update to the PVR's firmware delivered over the TV transmission system. An OTA firmware update to the Humax will not wipe the recording schedule.
What does wipe the recording schedule is a re-tune, either manually initiated or done automatically by the box. Automatic retunes are triggered by a signal embedded in the TV data, which is sent when new channels are added, old ones removed or existing ones renumbered or moved to a different mux. This is what is frequently referred to on hummy.tv as a "DSO": standing for Digital Switch Over, it dates back to the time when digital TV was replacing the analogue channels, a process which required a series of retunes in order to get all the digital channels activated and the analogue ones switched off. Since the actual DSO process completed several years ago, it's more than a little inaccurate to keep calling it that, but the term has persisted.
With the Humax, there is a historical link between OTA firmware updates and a "DSO" event. When the Humax receives a retune (ie "DSO") trigger it prompts the user, asking whether or not they want to proceed with the retune. In older versions of the firmware, this would time out and default to "no". In later versions it defaults to "yes" - so you have to actually be present when the box asks the question to stop it from wiping your recording schedule with a retune. The link with OTA is that the first firmware version which displayed this change in behaviour was delivered to existing boxes OTA - a process over which the ordinary user (ie someone not using the customised firmware) has no control. So the box updated its firmware unbeknownst to the user, then come the next automatic retune trigger, the box retuned itself without waiting for explicit permission from the user - and wiped their recording schedule.
The customised firmware available through hummy.tv allows users to install a package which prevents OTA firmware upgrades, and one which prevents "DSO" automatic retunes.
An excellent and concise post, just a shame Humax do not take note.
Many thanks for the info. Appreciated.
It seems worse than that. When I first got it I tried splitting the aerial signal so the rest of the equipment wasn't fed the signal via the Humax... but the Humax still needed to stay on. Bizarre.
Arrrrrrgh! It happened twice to me in one day! (HDR Fox T2).
I thought I had done something wrong at first, then discovered 30-odd scheduled recordings had been cleared.
That ridiculous "Automatic Scan" idiotically locked onto two weak Durris multiplexes, then added the seven strong Angus multiplexes, putting some channels in the 800's.
I rescanned manually, reset the recording schedule, powered down and came back later that evening to find the same thing had happened.
Humax need to fix this problem NOW.
The timer schedule on my HDR-T2 wiped without warning, and several recordings missed before I became aware of the problem. I laboriously reprogrammed the schedule then noticed that some of the new recordings were breaking up at times, evidently because they were on the wrong (weak) muxes.
Annoying!
Is there an alert service to check when these retunes are coming?