TV Sound to Surround Sound - Help Needed
[Deleted User]
Posts: 13
Forum Member
Hi All
I am trying to connect my Digihome Tv to my surround sound system using the red and white phono cables going out of the tv audio out socket and into the AV in on the surround sound. I can't seem to get the sound to get the sound to get to the surround sound system.
Any help is greatley appreciated.
Thanks
I am trying to connect my Digihome Tv to my surround sound system using the red and white phono cables going out of the tv audio out socket and into the AV in on the surround sound. I can't seem to get the sound to get the sound to get to the surround sound system.
Any help is greatley appreciated.
Thanks
0
Comments
If you give your equipment details (make and model number) it's much easier to help.
Too many "get the sounds" in there?
Answer - select the correct input on the home cinema to hear the TV audio rather than the inbuilt DVD audio.
The Tv is a Digihome 32 inch TV and the surround system is an LG DV2000ST DVD/VCR combi surround system.
Thanks
AV in would normally equate to scart input. Reading through the manual for this piece of kit (which makes absolutely no mention of it even being capable of handling audio input except via optical) it appears that AV can be used to indicate that the source can be either scart input or the composite/audio inputs on the front panel. However, these are only referred to in terms of feeding an external signal to the VCR for recording - not for outputting the audio to the speakers.
Perhaps you have to press the AV button on the remote twice to toggle between the two of them?