|
||||||||
Paswords |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Forum Member
Join Date: Jun 2006
Posts: 19
|
Paswords
Having very recently obtained a Humax FoxsatHDR i am faced with the problems arising from unfamiliarity with it's detailed operation. One problem which has remained intractable concerns the password facility. I understand on the basis of my current very limited knowledge of the operating procedure is hat when one selects a particular programme for recording then access to that location is subsequently locked and requires a password to unlock.
I have been faced with a screen reuiring inputting a password despite not having set one up. On inputting the systems default password I can get no response whatever and I then found the system d to be completely seized. It resisted all endeavours to move on and selecting standby and re-opening the system made no differnece with the screen window requiring inputting the password then re-appearing. It was only by removing and restoring power when the system re-booted that this password requiement dis-appeared. However a consequence of this was that on-built memory failed to retain the reservations that had been created, hence it is necessary to set these up again. I would mach appreciate any advice and assistance whereby this problem may be avoided in future, in short what have I been doing wrong, also being informed whether it is possible to dis-able the password facility altogether. I have not found any references in the manual which provide any help in this matter. It may have been helpful if the manual had provided an index whereby one could readily refer to all references to password and possibly as a consequence establish where I have not been following the appropriate procedure. |
|
|
|
|
Please sign in or register to remove this advertisement.
|
![]() |
|
All times are GMT. The time now is 16:18.

