[maf571]

Hi,

Never venture into this section so apologies if this has been answered prior.

I have a JVC XV-N33 DVD player and I have got a DVD from the US.

Is there a code I can put in to allow multi regioning? The DVD in the lounge is not multi region but the one in the bedroom is, but I don't fancy watching my movie in bed lol

[Tenacious Pee]

hi,

As far as i know this player has to have a mod made to it. they can be found here


Here

or

Email This Lot

But i have also found this remote control hack, but i have idea if it works on not.

1. Press the Power button on the player to turn it off
2. Wait 5 seconds
3. Press and hold the buttons DVD Menu and On Screen on the player together, and then press the Power button on the player to turn it back on
4. Release the DVD Menu and On Screen buttons
5. Press the Standby button on your player, the display should now show either "TEST 2", "TEST 4" or "TEST 6" depending on the player region
6. Press the DVD Menu button on your player twice in a row, the display should now show "000 5858"
7. By pressing the Up and Down cursors buttons, change the first three digits until they read "02E"
8. By pressing the Right and Left cursors buttons, change the last four digits until they read "0000" for Region Free, "0101" for Region 1, "0202" for Region 2, "0404" for Region 4, "0808" for Region 8, and finally "2020" for Region 20.
9. If you experience difficulties with Region 4 discs, change the above setting to "0458" and make sure that PAL or NTSC is correctly set on your player
10. Press the Enter button on your player to confirm the region change
11. Press the Standby button on the player to turn it off
12. Wait 5 seconds
13. Press the Standby button on the player to turn it on


WARNING...

This hack has not been tested therefore i cannot be resposible for any damage caused to the player

This the only hack which i can find for the player i find that there seems to be more dvd mods for the player than anything else

Hope it helps