|
||||||||
TF5000 - 5800 Display TAP Run's in Stand By And No Red LED!! |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Forum Member
Join Date: Jan 2005
Posts: 64
|
TF5000 - 5800 Display TAP Run's in Stand By And No Red LED!!
I recently updated to the latest firmware on my 3xTF5800's, all are about 3.5 years old with 160Gb drives, the red LED no longer emits when the unit is in Stand By and the TF5000 Display TAP also continues to run in Stand By, I disabled the TF5000 Display TAP just in case it was causing the problem but the red Stand By LED still does not emit, I have the latest Tap's installed and the only thing I haven't tried is removing all TAP's but I somehow think it's to do with the latest 5.14.09+ firmware, any one else had this problem and is there a fix, thanks in advance for any advice.
|
|
|
|
|
Please sign in or register to remove this advertisement.
|
|
|
#2 |
|
Forum Member
Join Date: Jul 2004
Location: SW London, Crystal Palace Tx
Posts: 2,769
|
I think that 5.13.** is the most stable firmware. You may get quicker advice from the Toppy forum at www.toppy.org.uk, that's where the experts "live".
parthena |
|
|
|
|
|
#3 |
|
Forum Member
Join Date: Jul 2007
Location: Chesterfield, Derbyshire
Posts: 174
|
@shithappens
I've PMed you. But I see you've kind of answered my question above. Are you sure the one you got recently is that old? |
|
|
|
|
|
#4 |
|
Forum Member
Join Date: Oct 2005
Posts: 79
|
As above, you want to be using the Toppy.org.uk recommended firmware (5.13.65T, which was from April 2009). Running any flavour of 5.14.X is not recommended for many more reasons than just the cosmetics of the red LED.
![]() A proper standby mode could be patched into 5.14.09 (like it has for the TF5810's 5.15.09) but TF5810 don't have the option of using the more stable 5.13.65 firmware. |
|
|
|
![]() |
|
All times are GMT. The time now is 09:59.


