DS Forums

 
 

Humax Foxsat PVR Remote


Reply
Thread Tools Search this Thread
Old 24-08-2009, 14:09
micalee
Forum Member
 
Join Date: Aug 2008
Posts: 132

On the remote, there are 'PVR', 'TV', 'DVD' & 'Audio' buttons. How are these configured? Im only really interested in turning the TV on with the remote by using the 'TV' button
micalee is offline   Reply With Quote
Please sign in or register to remove this advertisement.
Old 24-08-2009, 14:28
GaseousClay
Forum Member
 
Join Date: Oct 2008
Location: Worcester
Posts: 4,185
read from page 80 onwards in the manual it tells you how to program the buttons and the codes required for your equipment.

14.7 Using the Universal Remote Control
1. Select the mode (TV, PVR, DVD, AUDIO) you want to set by pressing the corresponding button on the
remote control. The button will blink once.
2. Keep pressing the button for 3 seconds until the button lights on.
3. Enter the 4-digit code. Every time a number is entered, the button will blink. When the fourth digit is
entered, the button will blink twice.
4. If a valid 4-digit code is entered, the product will power off.
5. Press the OK button and the mode button will blink three times. The setup is complete.
6. If the product does not power off, repeat the instruction from 3 to 5.
Note:
• When no code is entered for one minute the universal setting mode will switch to normal mode.
• Try several setting codes and select the code that has the most functions.
GaseousClay is offline   Reply With Quote
Old 24-08-2009, 15:15
micalee
Forum Member
 
Join Date: Aug 2008
Posts: 132
Many thanks
micalee is offline   Reply With Quote
Old 26-08-2009, 11:46
RobinB
Forum Member
 
Join Date: Mar 2004
Location: West London
Posts: 110

We've got a Mission Cyrus AV5 Amp, which doesn't have codes listed in the Humax manual.
Does anyone know if the Humax remote is following the codes of any other manufacturer?

I have an OFA remote which doesn't control that amp and wondered if the newer (and bigger!) Humax remote might manage.... if only I knew the code...
The "One For All" remotes have a search mode to allow you to work through the full internal set that the remote knows. There isn't a (documented) way to do that with the Humax remote control.
RobinB is offline   Reply With Quote
 
Reply




 
Forum Jump


All times are GMT. The time now is 09:23.