|
||||||||
Bob Cat - Discrete On and Off codes? |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Posts: n/a
|
Bob Cat - Discrete On and Off codes?
Bob Cat,
Does the FoxSat HDR have discrete on and off IR codes? If there are, can you make them available in HEX format so that they can be loaded onto my Nevo SL universal remote? Cheers John |
|
|
Please sign in or register to remove this advertisement.
|
|
|
#2 |
|
Forum Member
Join Date: Apr 2003
Posts: 55
|
Hi I have a Pronto
I use "0" which will bring the Humax on & sleep to turn off I dont believe Discrete codes exist Re Dave |
|
|
|
|
|
#3 |
|
Forum Member
Join Date: Aug 2004
Location: North West UK
Posts: 292
|
Quote:
Bob Cat,
Does the FoxSat HDR have discrete on and off IR codes? If there are, can you make them available in HEX format so that they can be loaded onto my Nevo SL universal remote? Cheers John |
|
|
|
|
|
#4 |
|
Forum Member
Join Date: Jan 2004
Location: The Sticks
Posts: 3,720
|
Second or thirded, the hdr's pickup angle on IR is so narrow mine often misses the 'OFF', so goes off next time I want it 'ON'.
|
|
|
|
|
|
#5 |
|
Forum Member
Join Date: Jul 2004
Posts: 28,527
|
I use the auto power off and power on, but then my watching is normally quite regimented, so to speak.
|
|
|
|
|
|
#6 |
|
Inactive Member
Join Date: May 2008
Posts: 7,144
|
I have asked their tech support manager about this in the past and he told me that the codes don't exist.
I use zero for on and toogle pwr for off. |
|
|
|
|
|
#7 |
|
Forum Member
Join Date: Feb 2004
Posts: 722
|
I've done some work as part of a completely unrelated project and can tell you that the HDR remote uses the extended NEC IR protoco, as described at the bottom of this page:
http://www.sbprojects.com/knowledge/ir/nec.htm If you'd have asked a cople of months earlier I could also have told you the address that the HDR is programmed to use, but it shouldn't take long to cycle through them to suss out the correct one. If desired I can get my kit back together and tell you the address that is used, as well as some of the command codes for the various remote commands. |
|
|
|
|
|
#8 |
|
Forum Member
Join Date: Jan 2009
Location: St Albans
Posts: 282
|
I'm a bit lost following this thread.
Could somebody explain in laymans terms what these discrete "on" and "off" codes are for, and what they do Thanks |
|
|
|
|
|
#9 |
|
Forum Member
Join Date: Feb 2008
Posts: 1,196
|
Quote:
I'm a bit lost following this thread.
Could somebody explain in laymans terms what these discrete "on" and "off" codes are for, and what they do Thanks This is no good for Universal Remotes which, for example, control a number of devices at the same time. This is because they, say, want to turn all the devices On at the same time. For this to work reliably, with "Toggle" type commands it is necessary to know whether the device is already On or Off (very difficult/impossible to determine automatically). For this reason it is much better if the universal remote can be programmed with discrete On/Off commands which the devices can understand and respond to. I hope this is clear. ![]() Graham. |
|
|
|
|
|
#10 |
|
Forum Member
Join Date: Mar 2008
Location: East Surrey
Posts: 121
|
Shadowman
It means that a specific IR code is sent for 'on' and a specific code sent for 'off'. The Humax remote is sending one command from the remote when pressing the on/off button. If the box is on, it will turn it off, if it is off, it will turn it on. This can cause problems in areas such as home automation, where multiple 'ons' or 'offs' need to be sent to ensure that the signal is received before sending the next command. Some receivers can receive a 'discreet' on or off even though the remote doesn't have such buttons. |
|
|
|
|
|
#11 |
|
Forum Member
Join Date: Jan 2009
Location: St Albans
Posts: 282
|
Graham & Millennium
Thanks for that explanation, I fully understand it now. I did not realise the thread was refering to universal remotes. Thanks again |
|
|
|
![]() |
|
All times are GMT. The time now is 09:23.


