We have been trying to sort an installation in France for a month or more.
We found out that we had a dodgy quad LNB, as one line was showing no signal to our Sky box, but showed a good signal on both inputs when connected to our new Foxsat unit. Subsequently we discovered that really only one was working with the Foxsat box (as with the Sky box).....the other was a "ghost".
Anyway, having now switched our Humax box to the end of the house with two good feeds from the dish, we find that input 2 if connected in isolation shows no signal. If both inputs are connected, then a full signal is shown on both.
I have swapped the cables around and either one conneced to input 1 in isolation shows full signal on both inputs. However whichever way we connect both cables, we still cannot watch and simultaneously record.
My fear is that input 2 is faulty......or am I missing something?
We found out that we had a dodgy quad LNB, as one line was showing no signal to our Sky box, but showed a good signal on both inputs when connected to our new Foxsat unit. Subsequently we discovered that really only one was working with the Foxsat box (as with the Sky box).....the other was a "ghost".
Anyway, having now switched our Humax box to the end of the house with two good feeds from the dish, we find that input 2 if connected in isolation shows no signal. If both inputs are connected, then a full signal is shown on both.
I have swapped the cables around and either one conneced to input 1 in isolation shows full signal on both inputs. However whichever way we connect both cables, we still cannot watch and simultaneously record.
My fear is that input 2 is faulty......or am I missing something?