Retuning my Humax 9200T

Dunnroamin · 04-11-2009, 09:55

Having successfully retuned my LG flatscreen TV, as required by the switching off of the analogue signal from Winter Hill, and managing to retain all the original number/channel settings, I turned my attention to the Humax. Going into Installation- Automatic Search, all the stations seem to have been successfully stored, again with the correct button numbers, except for BBC1 and BBC2. I tried using Edit Channels and Favourites, but this didn't seem to make any difference, information onscreen suggested "Channel not available", or something similar. The missing programmes do appear to be available on channels 804/805 (or something lsimilar). Can anyone suggest what I can do to resolve this problem, please.

Jarrak · 04-11-2009, 10:06

Factory reset and do a clean scan, I had the same sort of thing when I retuned last month so I suspect the solution is the same.

If that doesn't work then ask again in the Terrestrial/Freeview forum

Dunnroamin · 04-11-2009, 10:13

Quote:

Originally Posted by Dunnroamin

Having successfully retuned my LG flatscreen TV, as required by the switching off of the analogue signal from Winter Hill, and managing to retain all the original number/channel settings, I turned my attention to the Humax. Going into Installation- Automatic Search, all the stations seem to have been successfully stored, again with the correct button numbers, except for BBC1 and BBC2. I tried using Edit Channels and Favourites, but this didn't seem to make any difference, information onscreen suggested "Channel not available", or something similar. The missing programmes do appear to be available on channels 804/805 (or something lsimilar). Can anyone suggest what I can do to resolve this problem, please.

A PS to the above: when I press buttons one or two on the Humax remote control, a panel showing the relevant programme info appears onscreen eg. for button 2 - "BBC 2. Charlie and Lola", and the channel info (BBC1 or BBC2) appears on the Humax LCD display panel.

chrisjr · 04-11-2009, 10:14

Be aware a Factory Reset may delete all recordings (not sure as I haven't tried that on my Humax)

A safer option is to go into the menus and select the Edit Channel List option. Delete all channels both TV and Radio. Then do a retune.

My 9150 screwed up royally on just a simple retune and the above is what I had to do to sort it out. I would imagine the 9200 is fairly similar.

grahamlthompson · 04-11-2009, 10:41

Quote:

Originally Posted by chrisjr

Be aware a Factory Reset may delete all recordings (not sure as I haven't tried that on my Humax)

A safer option is to go into the menus and select the Edit Channel List option. Delete all channels both TV and Radio. Then do a retune.

My 9150 screwed up royally on just a simple retune and the above is what I had to do to sort it out. I would imagine the 9200 is fairly similar.

A factory reset will not delete any recordings only a disc format can do that. It will delete any recording reservations you may have so make a note of these and also any changes you have made to the default settings

Jarrak · 04-11-2009, 10:43

Yep my factory reset left all the recordings intact.

Dunnroamin · 04-11-2009, 10:44

Quote:

Originally Posted by Jarrak

Factory reset and do a clean scan, I had the same sort of thing when I retuned last month so I suspect the solution is the same.

If that doesn't work then ask again in the Terrestrial/Freeview forum

That seems to have done the trick, thanks Jarrak.

RunMartin · 04-11-2009, 22:06

Quote:

Originally Posted by Dunnroamin

That seems to have done the trick, thanks Jarrak.

How do you do a factory reset. Does it reload the original firmware as well?

Ehlert · 04-11-2009, 22:29

Quote:

Originally Posted by RunMartin

How do you do a factory reset. Does it reload the original firmware as well?

Just sorted out my problem and it was----------
Menu> Installation>Default Setting

Not sure how far back the reset goes but it leaves your recordings on the hard disc.

RunMartin · 05-11-2009, 05:22

Thanks, it seemed to work OK

Dunnroamin · 06-11-2009, 00:01

Quote:

Originally Posted by RunMartin

Thanks, it seemed to work OK

Aren't our fellow "Forumers" really helpful.

grahamlthompson · 07-11-2009, 09:39

Quote:

Originally Posted by Ehlert

Just sorted out my problem and it was----------
Menu> Installation>Default Setting

Not sure how far back the reset goes but it leaves your recordings on the hard disc.

A reset retains the last installed firmware. It's good practice anyway to do a reset after a new firmware is installed.

04-11-2009, 09:55	#1
Dunnroamin Forum Member Join Date: Nov 2006 Posts: 2,287	Retuning my Humax 9200T Having successfully retuned my LG flatscreen TV, as required by the switching off of the analogue signal from Winter Hill, and managing to retain all the original number/channel settings, I turned my attention to the Humax. Going into Installation- Automatic Search, all the stations seem to have been successfully stored, again with the correct button numbers, except for BBC1 and BBC2. I tried using Edit Channels and Favourites, but this didn't seem to make any difference, information onscreen suggested "Channel not available", or something similar. The missing programmes do appear to be available on channels 804/805 (or something lsimilar). Can anyone suggest what I can do to resolve this problem, please.

04-11-2009, 10:06	#2
Jarrak Forum Member Join Date: Jan 2002 Location: Ilkeston Posts: 18,075	Factory reset and do a clean scan, I had the same sort of thing when I retuned last month so I suspect the solution is the same. If that doesn't work then ask again in the Terrestrial/Freeview forum

04-11-2009, 10:13	#3
Dunnroamin Forum Member Join Date: Nov 2006 Posts: 2,287	Quote: Originally Posted by Dunnroamin Having successfully retuned my LG flatscreen TV, as required by the switching off of the analogue signal from Winter Hill, and managing to retain all the original number/channel settings, I turned my attention to the Humax. Going into Installation- Automatic Search, all the stations seem to have been successfully stored, again with the correct button numbers, except for BBC1 and BBC2. I tried using Edit Channels and Favourites, but this didn't seem to make any difference, information onscreen suggested "Channel not available", or something similar. The missing programmes do appear to be available on channels 804/805 (or something lsimilar). Can anyone suggest what I can do to resolve this problem, please. A PS to the above: when I press buttons one or two on the Humax remote control, a panel showing the relevant programme info appears onscreen eg. for button 2 - "BBC 2. Charlie and Lola", and the channel info (BBC1 or BBC2) appears on the Humax LCD display panel.

04-11-2009, 10:14	#4
chrisjr Forum Member Join Date: May 2004 Location: Reading Posts: 27,916	Be aware a Factory Reset may delete all recordings (not sure as I haven't tried that on my Humax) A safer option is to go into the menus and select the Edit Channel List option. Delete all channels both TV and Radio. Then do a retune. My 9150 screwed up royally on just a simple retune and the above is what I had to do to sort it out. I would imagine the 9200 is fairly similar.

04-11-2009, 10:41	#5
grahamlthompson Forum Member Join Date: May 2005 Location: Redditch Worcs Posts: 17,293	Quote: Originally Posted by chrisjr Be aware a Factory Reset may delete all recordings (not sure as I haven't tried that on my Humax) A safer option is to go into the menus and select the Edit Channel List option. Delete all channels both TV and Radio. Then do a retune. My 9150 screwed up royally on just a simple retune and the above is what I had to do to sort it out. I would imagine the 9200 is fairly similar. A factory reset will not delete any recordings only a disc format can do that. It will delete any recording reservations you may have so make a note of these and also any changes you have made to the default settings

04-11-2009, 10:43	#6
Jarrak Forum Member Join Date: Jan 2002 Location: Ilkeston Posts: 18,075	Yep my factory reset left all the recordings intact.

04-11-2009, 10:44	#7
Dunnroamin Forum Member Join Date: Nov 2006 Posts: 2,287	Quote: Originally Posted by Jarrak Factory reset and do a clean scan, I had the same sort of thing when I retuned last month so I suspect the solution is the same. If that doesn't work then ask again in the Terrestrial/Freeview forum That seems to have done the trick, thanks Jarrak.

04-11-2009, 22:06	#8
RunMartin Forum Member Join Date: Mar 2003 Location: Lancs, Pendle Forest Posts: 86	Quote: Originally Posted by Dunnroamin That seems to have done the trick, thanks Jarrak. How do you do a factory reset. Does it reload the original firmware as well?

04-11-2009, 22:29	#9
Ehlert Forum Member Join Date: Jan 2008 Posts: 178	Quote: Originally Posted by RunMartin How do you do a factory reset. Does it reload the original firmware as well? Just sorted out my problem and it was---------- Menu> Installation>Default Setting Not sure how far back the reset goes but it leaves your recordings on the hard disc.

05-11-2009, 05:22	#10
RunMartin Forum Member Join Date: Mar 2003 Location: Lancs, Pendle Forest Posts: 86	Thanks, it seemed to work OK

06-11-2009, 00:01	#11
Dunnroamin Forum Member Join Date: Nov 2006 Posts: 2,287	Quote: Originally Posted by RunMartin Thanks, it seemed to work OK Aren't our fellow "Forumers" really helpful.

07-11-2009, 09:39	#12
grahamlthompson Forum Member Join Date: May 2005 Location: Redditch Worcs Posts: 17,293	Quote: Originally Posted by Ehlert Just sorted out my problem and it was---------- Menu> Installation>Default Setting Not sure how far back the reset goes but it leaves your recordings on the hard disc. A reset retains the last installed firmware. It's good practice anyway to do a reset after a new firmware is installed.

DS Forums

Retuning my Humax 9200T