Recently my DTI6300 "died" and after reading various posts on this Forum I changed the caps. on the PSU board. It's now back up and running, except that there is no sound output from the box (at least on the SCART socket). I have checked the Ext. i/p of the TV using another source and it is OK. I have also checked the SCART lead and this is OK. The sound is absent on both the Tuner and HDD feeds from the box.

Does anybody have any ideas?

Stuart

I also have this problem, only for me I had one of these boxes that stopped working, i simply replaced the harddrive and voila it works again. So was a dead harddrive, nothing else.

But same as the post above for me, everything works fine apart from the sound! Nothing at all.

Any help would be great.

p.s the box is on 3.31 firmware