EPG Greyed out Channels?

Laurieast

08-02-2010

HUMAX FOXSAT 320GB PVR

When Recording one channel, several other channels will
be blocked from viewing

How can I view the other channels at the same time

Thanks

grahamlthompson

08-02-2010

How many cable connections have you got. You need two fully working connections to give 100% second tuner access to all channels. If you have only 1 cable plus the loop cable only channels with the same polarity and frequency band will be usable.

Check diagnostics to see what signal strength and quality you get for both tuners

Laurieast

08-02-2010

Originally Posted by grahamlthompson:
“How many cable connections have you got. You need two fully working connections to give 100% second tuner access to all channels. If you have only 1 cable plus the loop cable only channels with the same polarity and frequency band will be usable.

Check diagnostics to see what signal strength and quality you get for both tuners”

Both LNB cables are now plugged in.

How do I get back to Initial set up, to tell it that Both are plugged in?

Using manual tune I get about 500 channels

grahamlthompson

08-02-2010

Originally Posted by Laurieast:
“Both LNB cables are now plugged in.

How do I get back to Initial set up, to tell it that Both are plugged in?

Using manual tune I get about 500 channels”

Make a note of your recording schedules and do a factory reset. You should see a message reporting two cables found