|
||||||||
The 9200 --:-- clock problem. |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#26 |
|
Forum Member
Join Date: Dec 2005
Posts: 99
|
Big-les you are a gent and a scholar
![]() I've just been to the chemist and picked up the surgical (without oils) spirit and cotton buds... It's my day off tomorrow so I will report back as soon as I have a result. Cheers. |
|
|
|
|
Please sign in or register to remove this advertisement.
|
|
|
#27 |
|
Forum Member
Join Date: Mar 2000
Location: Cambridgeshire
Posts: 670
|
What can I say?
Another success!!! With the Australians departed to their next host, I set to. I used Maplin's isopropyl alcohol which, incidentally comes in an aerosol spray! I started cautiously by spraying some into the cap of the can and using a brush as instructed. However, largely because it was dissolving some handwriting on the board which was then spreading, I threw caution to the winds and sprayed the board directly, allowing the ink to run off. If I might add a couple of thoughts of my own - I found it slightly easier to remove the HDD connecter from the main board rather than the drive and, the mains cable of my unit is wrapped in cable tidy and then connected to a multi-plug so I thought that I would have to dismantle everything on the lounge carpet BUT, in fact, once you get the case off, it's easy to remove the mains connector from the circuit board. While I had the box open, I did something I've wanted to do for some time - lead the USB cable out of the back of the box. I used to keep the box behind the TV, permanently plugged into my computer but last year my trusty B&O Avant died and I now have a more conventional set-up and, though the front USB port may be more convenient for plugging in a laptop, it didn't suit me. I won't give details here except to say that it's straightforward, involving drilling a hole in the rear of the casing and extending the USB cable. If you want to do it and are capable, you'll be able to work out how. One final point. I've had the unit for 4 years and it's been on 24/7 most of the time. Not only was it behind the TV, but it was mounted vertically. This means that, unusually, the clock board was horizontal. The contaminant, whatever it might be, was clearly visible on both sides of the board, in the area of the oscillator circuitry. After cleaning, there was a slightly lighter patch where it had been. Now the EPG is cached and the clock works again, I might well switch it off at night! Thanks again Big-les
|
|
|
|
|
|
#28 |
|
Forum Member
Join Date: Apr 2006
Posts: 1,197
|
Quote:
As for your suggestion that the super capacitor....
|
|
|
|
|
|
#29 |
|
Forum Member
Join Date: Nov 2003
Posts: 23
|
Could someone put the guide to replacing the clock board somewhere that can be accessed. I've registered for the hummy.org forums but still won't let me access the guide. Will post how I get on fixing my clock problem if I can figure out how to access the board.
|
|
|
|
|
|
#30 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
.....
I used Maplin's isopropyl alcohol which, incidentally comes in an aerosol spray! I started cautiously by spraying some into the cap of the can and using a brush as instructed. However, largely because it was dissolving some handwriting on the board which was then spreading, I threw caution to the winds and sprayed the board directly, allowing the ink to run off. ..... So did you get the contamination off simply by spraying? Thanks for the report. |
|
|
|
|
|
#31 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
Could someone put the guide to replacing the clock board somewhere that can be accessed. I've registered for the hummy.org forums but still won't let me access the guide. Will post how I get on fixing my clock problem if I can figure out how to access the board.
|
|
|
|
|
|
#32 |
|
Forum Member
Join Date: Mar 2000
Location: Cambridgeshire
Posts: 670
|
Quote:
So did you get the contamination off simply by spraying?
|
|
|
|
|
|
#33 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
One thing I don't quite understand is why they bother with a supercapacitor to keep the clock going. The Humax can't actually do anything with the power off, and the first thing it does on powering up is to boot up and then go into standby. Surely this would give the box the opportunity to set the real time clock from the broadcast signal?
|
|
|
|
|
|
#34 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
No, it was a combination of brushing (which I think got rid of most of the contaminant) and spraying to flush away the felt tip residue. I happened to be in a cheapo stationers this morning and got a set of 15 artist's brushes for 99p. The one I used was a little on the firm side, which I think might have been an advantage.
|
|
|
|
|
|
#35 |
|
Forum Member
Join Date: Nov 2003
Posts: 23
|
Quote:
PM me your e-mail address and I'll send it.
|
|
|
|
|
|
#36 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
Thanks, I figured it out, it wasn't hard. Will have to wait ill tomorrow till I get some cleaner though. The back of the clock board seems a bit sticky in patches. I guess that's what you're cleaning.
|
|
|
|
|
|
#37 |
|
Forum Member
Join Date: Jul 2003
Location: Staffs/Salop/Cheshire borders
Posts: 128
|
Quote:
Could someone put the guide to replacing the clock board somewhere that can be accessed. I've registered for the hummy.org forums but still won't let me access the guide. Will post how I get on fixing my clock problem if I can figure out how to access the board.
|
|
|
|
|
|
#38 |
|
Forum Member
Join Date: May 2005
Location: Thatcham, Hannington Transmitt
Posts: 5,274
|
|
|
|
|
|
|
#39 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
It didn't work for me. Reports the file is corrupt?
Colin |
|
|
|
|
|
#40 |
|
Forum Member
Join Date: Nov 2003
Posts: 23
|
Quote:
What is wrong with Hummy.org then that stops some people from downloading the file, or is it their browser set up? I can download it from my own link and JefUK's link no problem and not logged in.
I don't think you need to disconnect the hard drive, as described in the document, to clean the circuit though. |
|
|
|
|
|
#41 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
I managed to download the document from the link this morning, had to log in first though.
I don't think you need to disconnect the hard drive, as described in the document, to clean the circuit though. |
|
|
|
|
|
#42 |
|
Forum Member
Join Date: Mar 2000
Location: Cambridgeshire
Posts: 670
|
You can't really clean the board properly (both sides) without removing it completely from the unit and, as Big-les says, you have to remover the HDD from the board to access the connector. Mine's all back together now, but it didn't look as if the board end of the cable came away easily.
I did, however, find it easier to disconnect the HDD cable from the board rather than from the drive though. |
|
|
|
|
|
#43 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
You can't really clean the board properly (both sides) without removing it completely from the unit and, as Big-les says, you have to remover the HDD from the board to access the connector. Mine's all back together now, but it didn't look as if the board end of the cable came away easily.
I did, however, find it easier to disconnect the HDD cable from the board rather than from the drive though. |
|
|
|
|
|
#44 |
|
Forum Member
Join Date: May 2005
Location: Thatcham, Hannington Transmitt
Posts: 5,274
|
Quote:
What is wrong with Hummy.org then that stops some people from downloading the file, or is it their browser set up? I can download it from my own link and JefUK's link no problem and not logged in.
Colin |
|
|
|
|
|
#45 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
I should have made it clear that I was able to download the .pdf but when I attempted to open it using Adobe I got a message saying the file was "damaged and could not be repaired"
Colin |
|
|
|
|
|
#46 |
|
Forum Member
Join Date: Dec 2005
Posts: 99
|
*Reporting in*
I followed the directions to the letter and cleaned it three times with a dry off period in-between. I put the Humax back together with the lid off just in case It didn't work (doubting myself not you Big-les), switched it on and bingo, the clock in stand by was showing 13:00... Thanks Big-les, kudos to you my friend. |
|
|
|
|
|
#47 |
|
Forum Member
Join Date: May 2005
Location: Thatcham, Hannington Transmitt
Posts: 5,274
|
Quote:
Did you try downloading it again?
Colin |
|
|
|
|
|
#48 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
*Reporting in*
I followed the directions to the letter and cleaned it three times with a dry off period in-between. I put the Humax back together with the lid off just in case It didn't work (doubting myself not you Big-les), switched it on and bingo, the clock in stand by was showing 13:00... Thanks Big-les, kudos to you my friend. |
|
|
|
|
|
#49 |
|
Forum Member
Join Date: Apr 2005
Posts: 16,034
|
I managed to clean mine with cotton buds, a paintbrush and some alcohol from an old CD-cleaning kit. I now have a fully-functioning 9200t once again.
Thanks Les!
|
|
|
|
|
|
#50 |
|
Forum Member
Join Date: Nov 2007
Posts: 2,669
|
Quote:
I managed to clean mine with cotton buds, a paintbrush and some alcohol from an old CD-cleaning kit. I now have a fully-functioning 9200t once again.
Thanks Les! ![]() Maybe they'll drop the price of a new board to a fiver for those owners with a dim display, as a good will gesture.
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
|
All times are GMT. The time now is 09:55.





Maybe they'll drop the price of a new board to a fiver for those owners with a dim display, as a good will gesture.