Hi i have a panasonic dmr 750 box connected to a router for network connections all the other boxes i have connected to this router work fine but the panasonic says NO NETWORK CONNECTION can anyone advise what am i doing wrong
Panasonic 750 N0 Network Help Please
Does either the router or the TV have a connection indicator LED - normally Green or Yellow (May be part of the socket on the TV) and is it lit?
Is DHCP enabled on the router?
Have you tried testing the cable on one of the other connections?
Is DHCP enabled on the router?
Have you tried testing the cable on one of the other connections?
Good. The green light indicates connection powered.
Try completely repowering the TV (disconnect mains for 30 Secs) and repower with network cable connected.
After the TV is fully powered wait for 30 secs then look at the routers connected devices - Do you see the TV?
Check the TV is set to acquire IP address automatically.
Try completely repowering the TV (disconnect mains for 30 Secs) and repower with network cable connected.
After the TV is fully powered wait for 30 secs then look at the routers connected devices - Do you see the TV?
Check the TV is set to acquire IP address automatically.
The tv and router and the panasonic are all disconnected from the mains every night. and powered up every morning. I dont understand what you mean by do i see tv??
Originally Posted by HDMI:
“The tv and router and the panasonic are all disconnected from the mains every night. and powered up every morning. I dont understand what you mean by do i see tv??”
“The tv and router and the panasonic are all disconnected from the mains every night. and powered up every morning. I dont understand what you mean by do i see tv??”
[Sorry I thought the DMR 750 was a TV - see it's not]
Using the routers web access normally something like http://192.168.0.1 you should be able to display attached devices - is the DMR 750 shown? See the router manual got details, id and password.
Always power up the router at least 30 secs before anything else.
What else is connected to the router and are they all set to acquire IP addresses automatically?
Refer to the checklist on the DMR 750 manual [Page 94 of the on-line manual]
Then run the DMR 750 connection test again.
Repassac thank you for taking the trouble to help me,i have now got it all sorted,what i had to do was go into the panasonic network menu and slow down the installation ( it was too fast) it then said all was ok and to power down for the software to update.all is now working fine.Thank you once again for your advice Kind Regards David
Originally Posted by HDMI:
“Repassac thank you for taking the trouble to help me,i have now got it all sorted,what i had to do was go into the panasonic network menu and slow down the installation ( it was too fast) it then said all was ok and to power down for the software to update.all is now working fine.Thank you once again for your advice Kind Regards David”
“Repassac thank you for taking the trouble to help me,i have now got it all sorted,what i had to do was go into the panasonic network menu and slow down the installation ( it was too fast) it then said all was ok and to power down for the software to update.all is now working fine.Thank you once again for your advice Kind Regards David”
My pleasure.
