|
||||||||
Problems with upgraded Hard Drive in Humax FoxSat HDR |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Forum Member
Join Date: Nov 2008
Location: Merseyside, UK
Posts: 427
|
Problems with upgraded Hard Drive in Humax FoxSat HDR
Part way through the year I upgraded the hard drive in my Humax FosSat HDR to a 1TB Western Digital WD10EVDS drive (Model WD10EVDS-63U8B0). I had scoured the net (including this site) and seen that this drive was suggested as one that would work without going over the power-consumption or over-heating thresholds of the box.
In the Past few months I've been setting timer recordings more frequently and noticing that some recordings are simply not happening. Also, sometimes when I'm turning the box on from stand-by (maybe one-in-three times) it fails to detect the internal hard-drive, taking forever to boot up and then displaying an on screen message saying it was unable to detect the internal hard drive. Yet other times it boots up with no problems at all. I've opened the box up again and checked that all the connections (both SATA and Power) are securely located in their sockets. I'm at a loss for what else to check. I notice on the label of the hard drive that it offers jumper pin configurations as follows:- Jumpered pins 1&2 enables SCC (Spread Spectrum Clocking). Jumpered pins 3&4 enables PUIS (Power Up In Standby) Jumpered pins 5&6 enables 1.5GB PHY None of these pins currently have a jumper across them. I would be most greatful if any readers could suggest any ways to resolve this problem so that my box can once again be considered to be reliable. At the moment series link isnt worth a damn as some episodes get recorded and others dont. Any ideas most appreciated. Thanks in advance. |
|
|
|
|
Please sign in or register to remove this advertisement.
|
|
|
#2 |
|
Forum Member
Join Date: May 2005
Location: Redditch Worcs
Posts: 17,287
|
Sound suspicously like a power supply fault (Maybe blown Electrolytic Capacitors). Check the drive 5V and !2V power while the disc is running and look for capacitors with a bulge on the top.
Be carefull not to touch potentially live connections. |
|
|
|
|
|
#3 |
|
Forum Member
Join Date: Nov 2008
Location: Merseyside, UK
Posts: 427
|
All the capacitors that I can see appear to be in perfect condition. As for the PSU, surely if that were the case then the hard-drive would be non-operational for the vast majority of the time? I will dig out my milti-meter anyway and have a look.
|
|
|
|
|
|
#4 |
|
Forum Member
Join Date: Nov 2008
Location: Merseyside, UK
Posts: 427
|
I've just checked the power connections for the Hard Drive and its showing a steady 12.27 V on yellow and 4.96 on red which presumably are within acceptable norms of variance?
I notice the cooling fan isnt turning. Is it designed to only operate when the device is warm, or should it be running the whole time when operational? |
|
|
|
|
|
#5 |
|
Forum Member
Join Date: Aug 2004
Location: North West UK
Posts: 292
|
Quote:
All the capacitors that I can see appear to be in perfect condition. As for the PSU, surely if that were the case then the hard-drive would be non-operational for the vast majority of the time? I will dig out my milti-meter anyway and have a look.
|
|
|
|
|
|
#6 |
|
Forum Member
Join Date: Dec 2008
Posts: 67
|
Put the old drive back in that will give you an indication if it is the HDD going down. Ebuyer are selling a WD 1Tb for £37.99 if it is proved to be dying.
Last edited by caldirun : 05-12-2010 at 16:40. Reason: just felt like it! |
|
|
|
![]() |
|
All times are GMT. The time now is 07:31.

