DS Forums

 
 

Problem With Foxsat Freesat 320GB


Reply
Thread Tools Search this Thread
Old 01-01-2011, 14:41
TClarke
Inactive Member
 
Join Date: Nov 2010
Posts: 799

When I had this installed it worked perfectly but now it won't record except on the channel you are watching. The one in the front room works fine.

Is it likely that the problem is with the strength of signal - having two boxes?

Also, an annoying thing is that there is no page up/down facility on the channel guide - is this normal?

Thanks - apologies for my ignorance of technical details.
TClarke is offline   Reply With Quote
Please sign in or register to remove this advertisement.
Old 01-01-2011, 16:20
REPASSAC
Forum Member
 
Join Date: Jun 2010
Location: Perchede, France
Posts: 1,936
When I had this installed it worked perfectly but now it won't record except on the channel you are watching. The one in the front room works fine.

Is it likely that the problem is with the strength of signal - having two boxes?

Also, an annoying thing is that there is no page up/down facility on the channel guide - is this normal?

Thanks - apologies for my ignorance of technical details.
It sounds like only one LNB is properly connected - Firstly check the two connections carefully (at the box and dish ends) and post back the result.

Assuming you have not done a factory reset the box should normally be trying to use both LNB inputs - so try and swap the boxes over.

Can you also confirm you have one dish with a quad LNB.

Page up and down in the guide should work fine - using the large rectangular rocker key marked 'P'
REPASSAC is offline   Reply With Quote
 
Reply




 
Forum Jump


All times are GMT. The time now is 10:49.