|
||||||||
Humax Foxsat.....to blank DVD |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Inactive Member
Join Date: Dec 2010
Posts: 17,902
|
Humax Foxsat.....to blank DVD
Simple question here guys.
Can programmes recorded on the hard drive of a Humax Foxsat be sent to a DVR and copied either to the hard drive on that machine, or direct to blank disc? If so.......what is the connection setup? |
|
|
|
|
Please sign in or register to remove this advertisement.
|
|
|
#2 |
|
Forum Member
Join Date: Oct 2004
Location: Buckingham
Posts: 28,534
|
Yes they can using a SCART lead. But of course HD recordings will be downscaled to SD.
|
|
|
|
|
|
#3 |
|
Inactive Member
Join Date: Dec 2010
Posts: 17,902
|
Quote:
Yes they can using a SCART lead. But of course HD recordings will be downscaled to SD.
What is the cable and socket configuration and procedure through the setup menu? |
|
|
|
|
|
#4 |
|
Forum Member
Join Date: Oct 2004
Location: Buckingham
Posts: 28,534
|
SCART socket to SCART socket using a SCART lead. Just start the recorder going from its SCART socket then start playing the recording on the Foxsat.
|
|
|
|
|
|
#5 |
|
Inactive Member
Join Date: Dec 2010
Posts: 17,902
|
Quote:
SCART socket to SCART socket using a SCART lead. Just start the recorder going from its SCART socket then start playing the recording on the Foxsat.
|
|
|
|
|
|
#6 |
|
Forum Member
Join Date: Feb 2004
Location: Andover, Hampshire, UK
Posts: 3,624
|
You'll want the output (probably labelled "TV" or something) on the Humax plugged into the input (probably labelled "SAT" or "DECODER" or "VCR" or something) of the DVD recorder - then you'll probably want to connect the "TV" port of the DVD recorder into your TV (unless you connect it some other way). Many devices nowadays send either input or output through one port, in which case, you may have to configure it in the menu.
|
|
|
|
|
|
#7 |
|
Forum Member
Join Date: May 2005
Location: Redditch Worcs
Posts: 17,289
|
Quote:
There are two scart sockets on the rear of both the Humax and the DVR. Does it not matter which they go to?
|
|
|
|
|
|
#8 |
|
Forum Member
Join Date: Oct 2004
Location: Buckingham
Posts: 28,534
|
However you will then end up with both an HDMI and a SCART connection from the Foxsat to the TV. Which could be a problem as my TV was in the habit of switching from the HDMI input to the SCART input at the drop of a hat. In the end I cut Pin 8 on one of the SCART leads to stop it autoswitching.
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
|
All times are GMT. The time now is 16:20.

