i have an bush tv dvd/vcr combi , but i cant get my sky+ remote to work with the tv. i can change sky channels with it, but i cant use the volume button or turn the tv off with it.

i have tryed codes coming out of my bum, but still no sucsess.

Bush has hundreds off codes

make sure you have correctly stored the number and methodically go through them

telly model number may help for an obscure number

Funnily enough I had a similar problem, in that I bought a DVD player connected to my Bush TV, unfortunately there was no Bush code, however I used one of the Philips codes listed, and it works apart from being able to turn the TV back on again, it turns the TV off with no problems.

If anyone has a code that will sort that issue out would be great, it does say though in the manual that not all functions on the remote will work when using the remote codes.

My TV is Bush WS6673SIL

you really need to buy a Panny TV

dont if this will help,

RFBTV213DVD

OR

SERIEL NUM 673-6200139 B

this is the info on back off tv, so does any one have a code for my remote.

take out your batteries out of the sky remote and look to see what revision your handset is

does it say REV 8 for example

rev 6

that may be the problem

Rev 8 is what we are up to

for your PM , the basic switch on , volume should work

can you borrow a REV 8 at all and try it ?

okay you asked for it. This is all the codes I can find for Bush

you may want to reset the remote control at some point ................ most seem to work with REV 6 or older so you maybe in luck

print this page and score them off one by one





0157 246, 263, 377, 037, 064, 065, 310, 300,383, 399, 391, 402, 339


0696 0705 0645 0642 0742 0288 0584 0246 0688
1584 1928 1932 1936
0714 0724
0246 0263 0377 0037 0064 0065 0310 0300 0383
0391 0402 0547 0292 0239 0312 0609 0322 0339
0515 0236 0389 0191 0245 0584

0642 0645 0688 0696 0705 0726 0742

1065 0806 1696 1287 1271 0696 0642

thanks for your repley, only one of them so far blinked twice after the code, but the remote still didnt work the tv

what one blinked ?

To perform a RESET press [TV] and then hold [select] and [red button] together for around two seconds (until the red light blinks twice). Now press 999 (red light blinks once for a long time and then twice quickly).

This changes the TV model code back to default 038 (and, on earlier revisions, clears the macro and deletes any Key Magic changes that you have made).

You can then enter the correct code for your TV set and then set the turn-on channel to the one you want.

try using 0065 as the 4 digit code , if it doesn't work , continue pressing tv then standby button until it turns the tv off , then press select if it turns the tv off

i have tryed above,

lets just face it, there isnt a code for the tv i have, also its a shame i cant contact bush. good job this isnt my main tv, the one i have its for upstairs had it for about 4 years, so i will have to carry on with the tvs main controll.

but thanks for your time and help with me, and your knowlege as well. you could come in handy, in future .