[rswaffie]

Hi,
I have a Panny TX32G10b, connected via HDMI1 to a panny dmr-bs750. Also connected via scart to AV2 as per instruction book, I guess to enable viera link & instant record from DVB input. I have both freesat connections to the BS750 and a DVB freeview connection into the LCD. This enables me to record 2 freesat channels and watch a third via freeview simultaneously by choosing the TV option on the remote. However, I can't seem to get the TV to default to the hdmi1 input on power up, or when accessing EPG or other options - it seems to revert (although not all the time) to DVB input. I have set the TV up to select hdmi1 on power up from the menu option, but it doesn't always retain this. Anything I should try other than the startup preference?
Regards

Richard.

[niall campbell]

My G 20 model will always start on Freeview and then jump to HDMI 1 if there is a power feed there.

If the BS750 is on standby then that might be your problem ?

[iangrad]

If you enter the "Hotel" menu

( Press F & Vol down button on the TV and at the same time press "AV" 3 times -- the release te "F" button first )

You can then select your start up preferences in full .