Ive inherited the above telly from the son who is off to sunnier climes - I thought I could just take the Vogel frame off the back of my present Sony and stick it on the Panasonic, the frame will fit but the holes on the Panasonic are deep - can anyone advise me of the bolt size that the Panasonic takes. Thanks.
Securing bolts for Panasonic TH-42PZ80BA
Didn't you keep the rest of the screws from the Vogel bracket? - there should be suitable ones in there.
I've no idea of the actual size, but Plasma sets usually use a MUCH larger screw than LCD's, normally the largest supplied with the bracket..
I've no idea of the actual size, but Plasma sets usually use a MUCH larger screw than LCD's, normally the largest supplied with the bracket..
IME, and a bit of an educated guess, M8x20/25 or even M10x25/30 but you will probably have had them with the original Vogel bracket, as Nigel said. You did keep the box, didn't you?
Originally Posted by LCDMAN:
“IME, and a bit of an educated guess, M8x20/25 or even M10x25/30 but you will probably have had them with the original Vogel bracket, as Nigel said. You did keep the box, didn't you?”
“IME, and a bit of an educated guess, M8x20/25 or even M10x25/30 but you will probably have had them with the original Vogel bracket, as Nigel said. You did keep the box, didn't you?”
I can check the sizes tomorrow at work - it's just a question of finding a nut to fit the millions of spare bracket bolts I've got
Plasma sized ones are particularly common as the sets are relatively rare.
