[Dunnroamin]

I've used the Trust 1200 V2 SCROLL TABLET successfully for years in a pc using XP, but when I tried to install the CD ROM software into my laptop which uses Vista, it failed. I tried a couple of times, finally causing the computer to go into fault condition. When I got it started again, I opened Programs and Features to see if it had been installed, but the only thing that showed was the device name: 1200-V2 WIRELESS SCROLL TABLET and the date, but there were no MB's in the SIZE column so obviously, the installation had failed.

I decided to plug the device into the laptop without using the software ROM, and it seemed to work. To use the tablet, I opened Photoshop elements 2, and tried to do a test drawing, but there were two arrow pointers (one above the other) moving in unison as I moved the tablet pen over the tablet's surface, also, the arrows were flickering on and off rapidly.

I'm guessing that the problem is that the tablet and its software are incompatible with the Vista OS.

Does anyone know the answer to this, please.

[max99]

Unplug the tablet and then uninstall the software in Programs and Features. Download and install the Vista driver here:

http://www.trust.com/products/produc...TS&artnr=14070

[Dunnroamin]

Originally Posted by max99

Unplug the tablet and then uninstall the software in Programs and Features. Download and install the Vista driver here:

http://www.trust.com/products/produc...TS&artnr=14070

Thanks a lot, max.

[Dunnroamin]

Originally Posted by max99

Unplug the tablet and then uninstall the software in Programs and Features. Download and install the Vista driver here:

http://www.trust.com/products/produc...TS&artnr=14070

I clicked on the link you gave, and opened the TRUST Download page. Clicking on the Vista Download button, a popup appeared, headed: WinZip Self Self-Extractor [14070_05.exe] it continues with:

To unzip all files in 1470_05.exe to the specified folder press the Unzip button.

There are 2 boxes:...... Overwrite Files without Prompting and:

................When Done Unzipping Run: setup.exe, both these boxes are checked.

There are 2 more buttons marked Unzip and Run WinZip

I click on Unzip

Then a second "popup" appears asking: "Do you want to Run or Save 14070_05.exe (4.14MB) from drivers.trust.com?". I click the Run button which causes another "popup" which states: The Publisher of 14070_05.exe couldn't be verified. Are you sure you want to run the program?. I once again press the Run button and, once again I get the first "popup" -

WinZip Self-Extractor [1470_05.exe]


It would appear that I am going round in circles, with same boxes and popups coming up. Are you able to identify where I am going wrong. ATB. D