|
||||||||
Thomson DTI 6300 - Tuner 1 No Signal |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Forum Member
Join Date: Sep 2011
Posts: 14
|
Thomson DTI 6300 - Tuner 1 No Signal
My DTI 6300 has developed a "No Signal" problem.
I tried a re-tune, but receive message to the effect that the aerial may not be connected, and the re-scan fails. The aerial connection is good,and fully working with other freeview equipment The EPG display is correct and continues to upgdate. When I display the Tuning Information, Tuner 2 shows good signal strength, but Tuner 1 shows 0. I have observed the status messages for Tuner 1 stating "Software Upgrade In Progress" or "EPG update in progress", but the signal strength is still 0. Is this likely to be a hardware problem with Tuner 1 ? Is there a fix ? Is there a Tuner Reset or Factory Reset procedure which may resolve the issue ? Any info welcome Thanks, in advance Dave |
|
|
|
|
Please sign in or register to remove this advertisement.
|
|
|
#2 |
|
Forum Member
Join Date: Sep 2011
Posts: 14
|
Problem resolved
![]() Did a complete power cycle..... Removed power input cable and re-plugged. This resolved the problem. (NB I had previously tried a power off/on from remote control, but this did not resolve the problem) |
|
|
|
![]() |
|
All times are GMT. The time now is 16:46.


