|
||||||||
LG Soundbar |
![]() |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Forum Member
Join Date: Jul 2013
Posts: 9
|
LG Soundbar
I recently purchased an LG Soundbar & separate subwoofer(NB4530A). To start with I was very pleased as it improved the sound of my Sony flatscreen no end but now the bass keeps disappearing at least a few times a day and before I return it to the shop I wondered if there was anything apart from the actual connections that I should check. The only 2 connections are the mains lead and the Optical connection which both seem fine and don't bring the bass back even when they're physically checked. Any help would be much appreciated, thanks.
|
|
|
|
|
Please sign in or register to remove this advertisement.
|
|
|
#2 |
|
Forum Member
Join Date: May 2004
Location: Reading
Posts: 27,916
|
It would appear the sub connects over wireless to the soundbar. Which kind of suggests the wireless connection is dodgy.
According to the manual on the LG website if the LED on the sub shows red the wireless is not connected. If that is the case you need to re-pair the sound bar and sub. Also try moving the sub to a different position. There could be something blocking the signal or causing some sort of interference where it is at the moment. |
|
|
|
|
|
#3 |
|
Forum Member
Join Date: Oct 2007
Posts: 5,008
|
Quote:
It would appear the sub connects over wireless to the soundbar. Which kind of suggests the wireless connection is dodgy.
|
|
|
|
|
|
#4 |
|
Forum Member
Join Date: Jul 2008
Location: West Yorks
Posts: 6,180
|
Quote:
It's not as if positioning of the sub is important.
|
|
|
|
|
|
#5 |
|
Guest
Join Date: Feb 2008
Posts: 8,103
|
Quote:
What a stupid way of doing it when a pair of wires can be used! It's not as if positioning of the sub is important.
First off it depends on what the main speakers are and their frequency response, satellites are usually much higher than bookshelves, around 100-150Hz, therefore the sub will need to produce higher frequencies to integrate into the system, so you would not want to place it directly in ear shot, somewhere out of sight would be best. If you have bookshelves or floorstanders they tend to have a lower frequency response 80Hz down, perfect for the sub xover. Room placement still requires a bit of work to get it sounding right. Place it in the corner of the room tends to boost bass but can make it sound boomy because of wall reflections, placing it at the front in between the fronts next to a wall generally gives the best bass and room response. Type of sub whether it's down firing or front firing or both will have an affect on where it's best placed too. I've positioned and integrated dozens of subs and it's definitely not a case of stick it there that will do. |
|
|
|
|
|
#6 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,789
|
Quote:
I'm assuming your place the sub anywhere is based on the myth that low frequencies 80Hz and below are nondirectional so it's hard to tell where the bass is coming from? Though true
![]() Calling something a 'myth' (which it isn't), and then stating it's true (which it is) ![]() While it may be advantageous fitting the sub in different places, it's of relatively minor importance - because, as you admit, there's no directionality from a sub. Essentially it's no different to fitting a normal speaker, which provides full bass (apart from you're more hampered by directionality problems). Certainly a wireless sub is a VERY useful feature, because of it's 'random' situation, and the difficulty of running a wire from sound bar to sub discretely. |
|
|
|
|
|
#7 |
|
Forum Member
Join Date: Oct 2007
Posts: 5,008
|
Quote:
Interesting contradiction
![]() Calling something a 'myth' (which it isn't), and then stating it's true (which it is) ![]() While it may be advantageous fitting the sub in different places, it's of relatively minor importance - because, as you admit, there's no directionality from a sub. Essentially it's no different to fitting a normal speaker, which provides full bass (apart from you're more hampered by directionality problems). Certainly a wireless sub is a VERY useful feature, because of it's 'random' situation, and the difficulty of running a wire from sound bar to sub discretely. |
|
|
|
|
|
#8 |
|
Guest
Join Date: Feb 2008
Posts: 8,103
|
Quote:
Interesting contradiction
![]() Calling something a 'myth' (which it isn't), and then stating it's true (which it is) ![]() While it may be advantageous fitting the sub in different places, it's of relatively minor importance - because, as you admit, there's no directionality from a sub. Essentially it's no different to fitting a normal speaker, which provides full bass (apart from you're more hampered by directionality problems). Certainly a wireless sub is a VERY useful feature, because of it's 'random' situation, and the difficulty of running a wire from sound bar to sub discretely. Please point me to a normal speaker that has full bass equal to a sub woofer. |
|
|
|
|
|
#9 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,789
|
Quote:
The myth - thinking you can stick a sub anywhere just because the frequencies (80Hz and below) are non directional.
Quote:
Please point me to a normal speaker that has full bass equal to a sub woofer. ![]() High end HiFi speakers are pretty well as good, and have been over many decades - the silly sub-woofer extended bass isn't really that important to the quality of the sound. |
|
|
|
|
|
#10 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,789
|
Quote:
But you still have to run a wire to power it. Wireless subs must have power from somewhere even if it is to charge an internal battery.
That's the whole point - not having to have a wire dangling from the sound bar to feed the sub. |
|
|
|
|
|
#11 |
|
Guest
Join Date: Feb 2008
Posts: 8,103
|
Quote:
It's as true as most things are, and in comparison to full range speakers EXTREMELY true.
Any speaker with a sub built-in ![]() High end HiFi speakers are pretty well as good, and have been over many decades - the silly sub-woofer extended bass isn't really that important to the quality of the sound. To push the amount of air needed to produce v.low frequencies you need big boxes, big speakers, at least 12", huge magnets and large amounts of power, so even a high end HiFi speaker won't match decent sub a week of Sundays. A sub is an integral part of a 5/6/7.1 system, it has its own dedicated channel, it does the job the main speakers can't, why would you leave it out. If you want to hear/feel low frequency special f/x then a good sub will do that and add quality to the overall soundtrack - I don't see what's silly about it. |
|
|
|
|
|
#12 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,789
|
Quote:
Not a normal speaker if it has a sub built in, is it......
1) Two subs is twice the power. 2) It makes the stage look balanced. 3) Crossover frequency is probably higher. Quote:
To push the amount of air needed to produce v.low frequencies you need big boxes, big speakers, at least 12", huge magnets and large amounts of power, so even a high end HiFi speaker won't match decent sub a week of Sundays. Many subs (most?) don't use 12 inch drivers anyway. Quote:
A sub is an integral part of a 5/6/7.1 system, it has its own dedicated channel, it does the job the main speakers can't, why would you leave it out. If you want to hear/feel low frequency special f/x then a good sub will do that and add quality to the overall soundtrack - I don't see what's silly about it. |
|
|
|
|
|
#13 |
|
Guest
Join Date: Feb 2008
Posts: 8,103
|
Quote:
Why not?, it's just another driver in a multiway system - and stereo subs are commonly (if not always) used in PA systems. I suspect the reason for stereo in PA use is for a number of reasons:
1) Two subs is twice the power. 2) It makes the stage look balanced. 3) Crossover frequency is probably higher. Current receivers are now capable of running dual subs for 7/9/11.2. Much harder to setup, one tends to cancel the other one out, much easier if you can do it through a sub management system like Velodynes SMS-1. Quote:
And you've never seen HiFi speakers using 12 (or 15) inch bass units?
Quote:
Many subs (most?) don't use 12 inch drivers anyway.
Quote:
Nothing 'silly' about having a sub - essentially it's a way to get decent bass without having to spend lot's of money (and space) on multiple HUGE speakers. It's the non-directional nature of low bass that makes it possible to use just one.
|
|
|
|
|
|
#14 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,789
|
Quote:
We are talking home cinema, a normal speaker would be considered to be of two way design.
'Normal' would be one, two, three, or four - two is probably most common, with three next most common. Quote:
Plenty of subs out there that use 12/15/18" drivers. Velodyne, Klipshe, Paradigm, Crystal Acoustics, MK Sound, SVS, BK...... Quote:
Just found your "silly subwoofer extended bass" comment strange...... |
|
|
|
|
|
#15 |
|
Forum Member
Join Date: Jul 2013
Posts: 9
|
Quote:
It would appear the sub connects over wireless to the soundbar. Which kind of suggests the wireless connection is dodgy.
According to the manual on the LG website if the LED on the sub shows red the wireless is not connected. If that is the case you need to re-pair the sound bar and sub. Also try moving the sub to a different position. There could be something blocking the signal or causing some sort of interference where it is at the moment. |
|
|
|
|
|
#16 |
|
Forum Member
Join Date: May 2004
Location: Reading
Posts: 27,916
|
Quote:
I have the soundbar about a foot below the TV on a glass stand one side of a chimney breast and the sub about 8' away from the soundbar the other side of the chimney breast. Neither is blocked out by the chimney breast, both can see each other.
From the manual it looks like the sub uses Bluetooth. Which could mean it's getting interference from other devices in the band, which includes WiFi routers. If so that will reduce the effective range of the connection. |
|
|
|
|
|
#17 |
|
Forum Member
Join Date: Dec 2004
Posts: 21,646
|
Quote:
But many, and almost certainly most, don't use large drivers - which is rather the point in using a sub in the first place (to save space)..
And then there is the sort of subwoofer people use to supplement a high quality AV system, which makes use of the dedicated LFE channel. Quote:
Just that extending the bass down a little gives little improvement over a high quality large HiFi speaker system.
For rather extravagant values of "large", perhaps. My main speakers are tall floorstanders but quite thin. On their own they have a decent enough bass response, but nothing like I get from my REL subwoofer, which (not often, but when the soundtrack demands it) I can feel.
|
|
|
|
|
|
#18 |
|
Guest
Join Date: Feb 2008
Posts: 8,103
|
Quote:
I'm talking audio in general - not specifically home cinema, which is usually a compromise due to size and budget constraints.
Quote:
But many, and almost certainly most, don't use large drivers - which is rather the point in using a sub in the first place (to save space)..
You use a sub to make use of the dedicated .1 channel, not to save space. There are plenty of systems out there where the sub is the biggest speaker. There are also plenty of people who don't like subs because of their size. If they are any good it'll be in their nature to be big. There are subs out there that use smaller drivers, these are cheap budget boom boxes, it's these that can sometimes add nothing to a system. Quote:
Just that extending the bass down a little gives little improvement over a high quality large HiFi speaker system.
Even with speaker that can produce 32Hz adding a decent sub that can produce 20Hz could greatly improve the overall quality. |
|
|
|
|
|
#19 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,789
|
Quote:
Wouldn't be a .1 system, soundtrack would be downmixed. Doubt you'll find many using such speakers in a multichannel setup.
|
|
|
|
|
|
#20 |
|
Guest
Join Date: Feb 2008
Posts: 8,103
|
Quote:
The .1 is almost entirely downmixed anyway, again that's the point as it's non-directional - even assuming there's extra content added to the .1 it could just as easily be added to the other channels instead (assuming the other channels all had suitable bass capacity).
Downmixing - reducing said number of channels to a lower number of channels ie. downmix 5.1 to 5.0. What makes you think the .1 channel only carries nondirectional frequencies? The .1 channel carries frequencies up to around 250Hz. What do you mean extra content - frequencies from around 250Hz down are just filtered out and recorded to the .1channel on the soundtrack. |
|
|
|
|
|
#21 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,789
|
Quote:
I think you have misunderstood.
Downmixing - reducing said number of channels to a lower number of channels ie. downmix 5.1 to 5.0. What makes you think the .1 channel only carries nondirectional frequencies? ![]() Are you claiming your sub is sited in a suitable place for directional sound on EVERY film you have? - I think not, it's non directional, which is the point of it. Quote:
The .1 channel carries frequencies up to around 250Hz. What do you mean extra content - frequencies from around 250Hz down are just filtered out and recorded to the .1channel on the soundtrack. The reason for supplying the .1 channel is so the possibility exists for adding extra effects to the sub channel only - although as I see it you could just as easily add them to the other channels and filter them out in the home amplifier anyway. |
|
|
|
|
|
#22 |
|
Guest
Join Date: Feb 2008
Posts: 8,103
|
Quote:
The fact you only have one, and there's no instructions for where to site it on each DVD you buy
![]() Are you claiming your sub is sited in a suitable place for directional sound on EVERY film you have? - I think not, it's non directional, which is the point of it. I'm claiming nothing of the sort - I'm saying, don't assume you can just stick a sub anywhere just because it can produce nondirectional frequencies, there's more to it than that. Quote:
There's no reason to provide a .1 channel, if all you're doing it filtering the bass off the other five (as is normal for a sub), and this can VERY easily be done in the home amplifier (or even passively in the speakers).
The reason for supplying the .1 channel is so the possibility exists for adding extra effects to the sub channel only - although as I see it you could just as easily add them to the other channels and filter them out in the home amplifier anyway. If you don't have a sub the .1 will be downmixed to how ever many channels you are using, if the frequency response of the speakers is only 40Hz you will be missing out on all the information from 40Hz and below, whatever's on that particular soundtrack, 25Hz, 20Hz, 15Hz. A lot of information missed there, not only audio wise but frequencies you feel. |
|
|
|
|
|
#23 |
|
Forum Member
Join Date: Nov 2013
Posts: 3,199
|
I recently bought a Yamaha 101 bar for daytime TV- have a Yamaha 375 with Tannoys for movies.
I am really pleased with the 101 - the clarity of speech is excellent, and the bass output really surprising from such a slim unit, be it a low rumble, or the boom and bang stuff. Richers have the YAS 201, which has a seperate wirless sub on offer this week for 169.95 (sign up on the VIP link to get the offer) usual price is 199.00. http://www.richersounds.com/product/...014-07-13_1304 If the OP is thinking of changing, I doubt the Yam 201 will disappoint. Personally, I wouldn't spend more than 200 on a sound bar, because you won't get the rear surround sound as can be obtained from a full system. |
|
|
|
|
|
#24 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,789
|
Quote:
What has DVD got to do with downmixing? I don't think you're on the same page here......
Quote:
I'm claiming nothing of the sort - I'm saying, don't assume you can just stick a sub anywhere just because it can produce nondirectional frequencies, there's more to it than that. |
|
|
|
|
|
#25 |
|
Guest
Join Date: Feb 2008
Posts: 8,103
|
Quote:
From your claim that subs produce directional audio, in which case the sub would need to be sited in the correct place - which would need to be specified on every individual film.
.1 channel can produce frequencies around 250Hz downwards, not just non directional frequencies. A system consisting of 5 main speakers capable of producing 50Hz, 1 sub that goes down to 20Hz. You set the xover to 80Hz, then everything from 80Hz and below gets sent to the sub. The frequencies from the sub will be non directional, but that doesn't mean you can stick it anywhere in the room, there are other factors to consider, because the wavelengths are long things like reflections, furnishings, standing waves can affect the bass response in the room. The advantage if its in line of sight you won't be able to tell where the bass comes from. A system consisting of 5 satellite speakers capable of only producing 130Hz, 1 sub that goes down to 20Hz. You set the xover to 130-140Hz, everything from 130-140Hz and below is sent to the sub, then the sub will be producing directional frequencies, best option is to place out of site, if in sight you will be able to tell where the frequencies are coming from, so again, thought and care is needed in positioning the sub, you can't just plonk it anywhere. Quote:
I agreed a LONG time back that there are limitations on where you might site a sub, but it has nothing to do with any imagined directional properties - only with the physics of fitting speakers close to walls or not.
|
|
|
|
![]() |
|
|
All times are GMT. The time now is 06:11.




