|
||||||||
720p TV with HD freeview box question??? |
![]() |
|
|
|
Thread Tools | Search this Thread |
|
|
#26 |
|
Forum Member
Join Date: Oct 2007
Posts: 5,007
|
Quote:
you need to be aware that it will have two tuners
Tuner 1 is good old fashioned RF Tuner 2 will be DTV . Digital Television. Select DTV |
|
|
|
|
Please sign in or register to remove this advertisement.
|
|
|
#27 |
|
Forum Member
Join Date: Oct 2007
Posts: 5,007
|
[quote=grahamlthompson;75308793]Australia (and presumably New Zealand) use a different mux spacing to the UK (If I remember correctly 8Mhz in the UK and 7Mhz in Ociana) .
[quote] Please don't assume, get the facts. Australia uniquely uses MPEG2 DVB-T with 7MHz spacing in UHF and VHF. New Zealand uses MPEG4 DVB-T with 8MHz spacing in UHF only (no VHF). |
|
|
|
|
|
#28 |
|
Forum Member
Join Date: Aug 2010
Posts: 2,642
|
Quote:
It could be that - but it's certainly not the cable socket.
If nothing else, just get a Freeview box to feed it. |
|
|
|
|
|
#29 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,783
|
Quote:
do you think a freeview box will solve the problem?
|
|
|
|
|
|
#30 |
|
Forum Member
Join Date: Aug 2010
Posts: 2,642
|
Quote:
Of course - you've already said it works off the external inputs - and that's where you connect a Freeview box.
|
|
|
|
|
|
#31 |
|
Forum Member
Join Date: May 2004
Location: Reading
Posts: 27,902
|
Quote:
yeah, i only ask because the tv is not finding any signal, signal strength is 0, so i am not sure that a freeview box will solve the problem...
Also do you know that the cable you have been using is actually connected to an aerial at all? Is it possible that the cable is an old satellite cable and is connected to a dish (or maybe was if the dish has been removed). If the cable has an F-type screw connector then it may well be a satellite connection. That would explain the lack of signal. So before doing anything else I would be making sure the cable is connected to an aerial and that it is delivering a signal to the TV or any Freeview box you intend to use. |
|
|
|
|
|
#32 |
|
Forum Member
Join Date: Aug 2010
Posts: 2,642
|
Quote:
You need to confirm that the aerial system you have is working. The easiest way to do this is to use a TV that you know receives Freeview OK and plug it into the aerial and see if that can receive anything.
Also do you know that the cable you have been using is actually connected to an aerial at all? Is it possible that the cable is an old satellite cable and is connected to a dish (or maybe was if the dish has been removed). If the cable has an F-type screw connector then it may well be a satellite connection. That would explain the lack of signal. So before doing anything else I would be making sure the cable is connected to an aerial and that it is delivering a signal to the TV or any Freeview box you intend to use. |
|
|
|
|
|
#33 |
|
Forum Member
Join Date: May 2004
Location: Reading
Posts: 27,902
|
Quote:
thanks for your detailed response, i have another tv with built in freeview and it works with the antenna no problem, its just this sony tv doesn't find the signal...
|
|
|
|
|
|
#34 |
|
Forum Member
Join Date: Aug 2010
Posts: 2,642
|
Quote:
If by that you mean that the other TV works OK on the same cable that you have been plugging into the Sony TV then a separate Freeview box will almost certainly work OK. The fact that the Sony TV can't find a signal will have no bearing whatsoever on the ability of an external box to tune into anything. The only requirement is that there is a signal on the aerial cable for the box to tune into.
|
|
|
|
![]() |
|
|
All times are GMT. The time now is 22:08.


