|
||||||||
LED TV - Not a fault, but where are these pictures being stored? |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Forum Member
Join Date: Jan 2004
Location: Lancs
Posts: 7,928
|
LED TV - Not a fault, but where are these pictures being stored?
I have a 32" Sharp TV connected as follows (all connections HDMI).
TV connected to HDMI output of a Tvonics receiver/recorder for freeview Sky HD receiver (Pace) connected through HDMI input 1 on Tvonics receiver Humax HD receiver for french TNT-Sat and other foreign broadcasts through HDMI 2 on Tvonics receiver (Humax receiver purchased recently from France) Apart from what follows it all works perfectly. Now this is what is happening. If I switch off the TV off after watching somehing from the Humax, the "old video" is displayed when I switch the TV back on. By that, I mean the TV displays about 10 seconds of pictures from the time the set was switched off, the picture then dissolves and the current programme then appears. The sound is always the current programme and the picture and sound are synchronised correctly when it appears. So where could these few seconds of video be being stored and why are they not overwritten with the current input when the set is switched back on? it seems very odd and only happens with programmes from the Humax, an HDMI issue perhaps? I have never seen anything like this before and it does not happen with output from the sky or freeview equipment. |
|
|
|
|
Please sign in or register to remove this advertisement.
|
|
|
#2 |
|
Forum Member
Join Date: Jul 2003
Location: Fylde Coast
Posts: 8,103
|
I have two PVRs, both different makes to yours. I get a similar thing - except I just get a still frame from the last time they were used. I assume it comes from the buffer in the PVR.
|
|
|
|
|
|
#3 |
|
Forum Member
Join Date: Jan 2004
Location: Lancs
Posts: 7,928
|
Strange isn't it? It only affects the output from the Humax receiver so I wonder if there might be some minor issue with their implementation of HDMI?
|
|
|
|
|
|
#4 |
|
Forum Member
Join Date: May 2005
Location: Redditch Worcs
Posts: 17,296
|
Quote:
Strange isn't it? It only affects the output from the Humax receiver so I wonder if there might be some minor issue with their implementation of HDMI?
|
|
|
|
|
|
#5 |
|
Forum Member
Join Date: Jan 2004
Location: Lancs
Posts: 7,928
|
Quote:
I reckon it's stored in the video processing buffers in the TV. Instead of putting it into sby, try turning the TV off at the mains for say 5 minutes. Does it happen when you turn on the TV again ?
|
|
|
|
|
|
#6 |
|
Forum Member
Join Date: May 2004
Location: Reading
Posts: 27,927
|
Quote:
I reckon it's stored in the video processing buffers in the TV. Instead of putting it into sby, try turning the TV off at the mains for say 5 minutes. Does it happen when you turn on the TV again ?
Though one thing that might point to the source of these images is if the TV comes back on with the Humax HDMI selected or not. If it defaults to switching on with, say, it's built in tuner selected then that does suggest its the TV storing the images. But if it remembers which source it was set to and goes back to that then it might be the Humax. Does seem rather odd that it only seems to be the Humax images that get stored in this way. |
|
|
|
|
|
#7 |
|
Forum Member
Join Date: May 2005
Location: Redditch Worcs
Posts: 17,296
|
Quote:
If that were the case then surely it would affect every source not just the Humax PVR only?
Though one thing that might point to the source of these images is if the TV comes back on with the Humax HDMI selected or not. If it defaults to switching on with, say, it's built in tuner selected then that does suggest its the TV storing the images. But if it remembers which source it was set to and goes back to that then it might be the Humax. Does seem rather odd that it only seems to be the Humax images that get stored in this way. That includes a HDR100Os (boots to the freetime home screen). the others 2 HDR FOX-T2 and a Foxsat-HDR boot to live viewing of the last viewed channel. This has been the case with 3 different TV's (2 Sonys and a Panasonic) and 3 different AV receivers (Denon, Sony and Yamaha). All of them buffer live content to a fixed size file on the hard disk, switching off or changing channels starts recording over the buffer file from the beginning. As this totally destroys the previous recorded data it would seen impossible to be down to the Humax PVR. It's possible on a Foxsat-HDR with the Custom Firmware to actually copy this file to a PC and examine the contents (Even HD is not encrypted). The Foxsat-HD has no recording capability and therefore no buffer, so it's quite impossible it remembers anything. This data afaik cannot possibly exist on a Humax box other than on the hard disk in the time shift file. Booting the box if the box was sending this to the TV it must appear on the connected display, this has never ever been posted on any forum I have ever read. Hard to see it can be anything but a peculiarity with the TV, The TV the OP has is not exactly mainstream so my guess it has to be the cause of the peculiarity .It would be interesting to know what the video output settings of the various other kit is set to. Perhaps swap the HDMI inputs to see if it's input specific. |
|
|
|
|
|
#8 |
|
Forum Member
Join Date: Jan 2004
Location: Lancs
Posts: 7,928
|
Quote:
My TV remembers the input, there is no issue with any of my 4 Humax recorders.
That includes a HDR100Os (boots to the freetime home screen). the others 2 HDR FOX-T2 and a Foxsat-HDR boot to live viewing of the last viewed channel. This has been the case with 3 different TV's (2 Sonys and a Panasonic) and 3 different AV receivers (Denon, Sony and Yamaha). All of them buffer live content to a fixed size file on the hard disk, switching off or changing channels starts recording over the buffer file from the beginning. As this totally destroys the previous recorded data it would seen impossible to be down to the Humax PVR. It's possible on a Foxsat-HDR with the Custom Firmware to actually copy this file to a PC and examine the contents (Even HD is not encrypted). The Foxsat-HD has no recording capability and therefore no buffer, so it's quite impossible it remembers anything. This data afaik cannot possibly exist on a Humax box other than on the hard disk in the time shift file. Booting the box if the box was sending this to the TV it must appear on the connected display, this has never ever been posted on any forum I have ever read. Hard to see it can be anything but a peculiarity with the TV, The TV the OP has is not exactly mainstream so my guess it has to be the cause of the peculiarity .It would be interesting to know what the video output settings of the various other kit is set to. Perhaps swap the HDMI inputs to see if it's input specific. |
|
|
|
|
|
#9 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,794
|
Quote:
The TV is a bog standard 32" Sharp bought from Richer Sounds about 18 months ago. They told me they were selling a lot of them at the time, what's not "mainstream" about it?
Most common fault on them is rectifier failure, due to their poor design - common across numerous Vestel sets. |
|
|
|
|
|
#10 |
|
Forum Member
Join Date: Jan 2004
Location: Lancs
Posts: 7,928
|
Quote:
Depends what you mean by 'mainstream'?, it's just a cheap Vestel set - identical to most other cheap makes.
Most common fault on them is rectifier failure, due to their poor design - common across numerous Vestel sets. |
|
|
|
|
|
#11 |
|
Forum Member
Join Date: Apr 2006
Location: North Derbyshire
Posts: 41,794
|
Quote:
Not a bad picture but the sound is only just about adequate.
|
|
|
|
![]() |
|
All times are GMT. The time now is 17:02.


.