DS Forums

 
 

Best Modem RJ11 Cable


Reply
Thread Tools Search this Thread
Old 01-10-2015, 20:58
TheVoid
Forum Member
 
Join Date: Apr 2012
Posts: 2,642

I need a decent 10m modem cable for my BT infinity. Any suggestions? Is there a particular kind I need or will a simple extension cable from currys be ok?

Is this a decent enough one?

http://m.ebuyer.com/267650

It does seem pretty thick so I'd kind of prefer to get this:

http://www.pcworld.co.uk/gbuk/phones...09460-pdt.html

Does that seem like it could give me poor performance?

Thanks
TheVoid is offline   Reply With Quote
Please sign in or register to remove this advertisement.
Old 01-10-2015, 21:41
syko29793
Forum Member
 
Join Date: Mar 2012
Posts: 99
A better choice of cable would be an RJ11 to RJ45.

something like this

http://www.amazon.co.uk/LINDY-RJ-11-...j45+to+rj11+1m

They tend to be better quality.
The RJ45 end fits into your filter/Openreach socket and the RJ11 goes to the hub.

I have one and i gained a 5 meg speed increase,
syko29793 is offline   Reply With Quote
Old 01-10-2015, 21:58
TheVoid
Forum Member
 
Join Date: Apr 2012
Posts: 2,642
A better choice of cable would be an RJ11 to RJ45.

something like this

http://www.amazon.co.uk/LINDY-RJ-11-...j45+to+rj11+1m

They tend to be better quality.
The RJ45 end fits into your filter/Openreach socket and the RJ11 goes to the hub.

I have one and i gained a 5 meg speed increase,
I thought I needed an RJ11 to RJ11?
TheVoid is offline   Reply With Quote
Old 01-10-2015, 22:30
chrisjr
Forum Member
 
Join Date: May 2004
Location: Reading
Posts: 27,903
I thought I needed an RJ11 to RJ11?
The socket on the Openreach Infinity master socket is an RJ45 type. It is physically compatible with RJ11 and just so happens to be wired such that it is electrically compatible as well.

So as long as the wiring is correct it matters not if you have a RJ11 or RJ45 plug at the master socket end. And it is unlikely that a simple change from RJ11 to RJ45 will have any effect at all on performance. The most likely explanation for the speed increase noticed by syko29793 is the quality of materials used and the construction of the cable compared to the one being used previously. An RJ11 to RJ11 of similar quality would work just as well.

Of the two you linked to in the OP the Belkin cable is likely to be better. The PCWorld cable I would only use as a phone extension lead. Though given a choice I might be more inclined towards the Lindy lead from Amazon than the Belkin.

Though the one linked to above is just 1m, this is the 10m version

http://www.amazon.co.uk/LINDY-RJ-11-...dp/B00B9CKHM4/
chrisjr is offline   Reply With Quote
Old 01-10-2015, 22:44
TheVoid
Forum Member
 
Join Date: Apr 2012
Posts: 2,642
The socket on the Openreach Infinity master socket is an RJ45 type. It is physically compatible with RJ11 and just so happens to be wired such that it is electrically compatible as well.

So as long as the wiring is correct it matters not if you have a RJ11 or RJ45 plug at the master socket end. And it is unlikely that a simple change from RJ11 to RJ45 will have any effect at all on performance. The most likely explanation for the speed increase noticed by syko29793 is the quality of materials used and the construction of the cable compared to the one being used previously. An RJ11 to RJ11 of similar quality would work just as well.

Of the two you linked to in the OP the Belkin cable is likely to be better. The PCWorld cable I would only use as a phone extension lead. Though given a choice I might be more inclined towards the Lindy lead from Amazon than the Belkin.

Though the one linked to above is just 1m, this is the 10m version

http://www.amazon.co.uk/LINDY-RJ-11-...dp/B00B9CKHM4/
Thanks, so the one from currys is likely to be poor?

That Belkin one will be too thick to go through my doorway. The Lindy one seems OK but not sure how it differs from the currys one.
TheVoid is offline   Reply With Quote
Old 01-10-2015, 22:46
TheVoid
Forum Member
 
Join Date: Apr 2012
Posts: 2,642
Is this one OK?

http://www.amazon.co.uk/RJ11-RJ45-Te...+to+rj45+white
TheVoid is offline   Reply With Quote
Old 02-10-2015, 09:07
chrisjr
Forum Member
 
Join Date: May 2004
Location: Reading
Posts: 27,903
Thanks, so the one from currys is likely to be poor?

That Belkin one will be too thick to go through my doorway. The Lindy one seems OK but not sure how it differs from the currys one.
The Currys one looks to be poorer quality than the Lindy. Most things I've bought from Lindy have been decently made from good quality components.

How were you planning to run the cable through the doorway? Please do not say under the door in the gap between it and the carpet or under the carpet. Or round the frame in whatever gap there is. That will only end in tears. No matter how carefully you do it the cable will get broken. Trust me I've been there done that read the teeshirt

The correct way to do it is to drill a hole in the frame and feed the cable through the hole. Though that is a lot easier if you don't have a connector on the end of the wire. Wouldn't bother me as I have made up more RJxx plugs than I care to count but can understand why that might not appeal to everyone.
chrisjr is offline   Reply With Quote
Old 02-10-2015, 09:25
TheVoid
Forum Member
 
Join Date: Apr 2012
Posts: 2,642
It was going to go through the door frame. I fed an Ethernet cable through and its not really a tight squeeze so thought it would be ok. This is why I was going to go for the flat cable from currys.
TheVoid is offline   Reply With Quote
Old 02-10-2015, 09:50
moox
Forum Member
 
Join Date: Oct 2004
Posts: 14,637
Another option might be something like this: http://www.claritybroadband.co.uk/cl...nsion-Kit.html

As the name suggests it basically is what Openreach themselves would use if you wanted the modem/router far away from the master socket.
moox is offline   Reply With Quote
Old 02-10-2015, 10:14
TheVoid
Forum Member
 
Join Date: Apr 2012
Posts: 2,642
Another option might be something like this: http://www.claritybroadband.co.uk/cl...nsion-Kit.html

As the name suggests it basically is what Openreach themselves would use if you wanted the modem/router far away from the master socket.
Thanks, although I need to buy something today. It's actually really hard to find a shop that sells decent cable it seems.
TheVoid is offline   Reply With Quote
Old 02-10-2015, 10:38
MeanMint
Forum Member
 
Join Date: Feb 2006
Posts: 420
If you have an ethernet run already why do you need the extra length modem connection. Have your hub as close to the telephone point as possible and run ethernet from the Gig port at the back onto where you want and have a switch with extra ports if needed.
MeanMint is offline   Reply With Quote
Old 02-10-2015, 11:06
TheVoid
Forum Member
 
Join Date: Apr 2012
Posts: 2,642
If you have an ethernet run already why do you need the extra length modem connection. Have your hub as close to the telephone point as possible and run ethernet from the Gig port at the back onto where you want and have a switch with extra ports if needed.
I need the router in the lounge
TheVoid is offline   Reply With Quote
Old 02-10-2015, 13:09
lonewaller
Forum Member
 
Join Date: Feb 2005
Posts: 378
Thanks, although I need to buy something today. It's actually really hard to find a shop that sells decent cable it seems.
It appears time is not on your side. Another option would have been to buy a "modem" only unit for the hall and then use Ethernet to connect to a "router" in the lounge. I believe the HH5 can be used in this manor.

Brian
lonewaller is offline   Reply With Quote
Old 02-10-2015, 13:30
TheVoid
Forum Member
 
Join Date: Apr 2012
Posts: 2,642
It appears time is not on your side. Another option would have been to buy a "modem" only unit for the hall and then use Ethernet to connect to a "router" in the lounge. I believe the HH5 can be used in this manor.

Brian
Thanks. I think I'll just get the ultra flat cable from currys. I'm using the bt provided cable at the moment which is 3m long and get the full speed so it might be worth me trying this first.
TheVoid is offline   Reply With Quote
Old 02-10-2015, 15:05
MeanMint
Forum Member
 
Join Date: Feb 2006
Posts: 420
I need the router in the lounge
Why the need for the router in the lounge. Ideally our router should be in the lounge but that would mean having a cable of about 20m running from the telephone point.

Homeplug to lounge and switch bingo, sorted. No loss in broadband speed as the homeplug reports 178Mbps transfer speed.
MeanMint is offline   Reply With Quote
Old 02-10-2015, 16:56
lonewaller
Forum Member
 
Join Date: Feb 2005
Posts: 378
Thanks. I think I'll just get the ultra flat cable from currys. I'm using the bt provided cable at the moment which is 3m long and get the full speed so it might be worth me trying this first.
If it works at an acceptable speed then you're sorted. If not, you'll have bought yourself some time to think about what to do next.

Brian
lonewaller is offline   Reply With Quote
Old 02-10-2015, 17:07
moox
Forum Member
 
Join Date: Oct 2004
Posts: 14,637
Why the need for the router in the lounge. Ideally our router should be in the lounge but that would mean having a cable of about 20m running from the telephone point.

Homeplug to lounge and switch bingo, sorted. No loss in broadband speed as the homeplug reports 178Mbps transfer speed.
Homeplugs are a horrible kludge and may cause interference to other services. Best to run a cable, always - whether you do ethernet or VDSL through it.

It's cheaper to run a cable, too, and more futureproof
moox is offline   Reply With Quote
Old 03-10-2015, 09:11
TheVoid
Forum Member
 
Join Date: Apr 2012
Posts: 2,642
I got the flat cable from Curry's. Just as good as the cable that came with the hub. Still getting 37mb down and 9mb up which is the same as before.
TheVoid is offline   Reply With Quote
 
Reply




 
Forum Jump


All times are GMT. The time now is 10:57.