I have been looking on Amazon quite a lot and not seen a mount that is 300x200 (searched VESA 300X200).

They all seem to be 200x200 300x300 400x400 ?

Could anyone suggest a 300x200 mount that they have had good experience with and won't cost the earth?

Integrated cable management would be nice but not essential.

Thanks
Last edited by scampi1 : 09-06-2016 at 15:33

What sort of bracket are you looking for? One that just screws to a wall and the telly hangs off it statically (maybe with just a tilt adjustment) or one where you can adjust the angle the telly points at in all sorts of directions?

Most fixed wall brackets can be adjusted to any size VESA mount pretty easily. If you want a fully adjustable arm then perhaps something like this

http://www.btechavmounts.com/product...roducts/btv503

with these adapters to make it 300x200

http://www.btechavmounts.com/product...roducts/bt7540

Not used these specific mounts but have used plenty of B-Tech mounts before without any issues.

I was looking at the type that you can pull out from the wall as well as up,down left right adjustment.

Because I'll be installing it in the corner of my lounge I need the adjustability. (I have an electric fire in the middle of the wall I'm installing it on so that's why it's going in the corner).

I'm starting to think my options may be limited for a vesa fitting of 300 x 200?

Not at all, most brackets for larger sets will fit directly, and if not there are adaptor packs to do so - I've fitted hundreds of TV's, never had a problem (with the brackets at least ).

Biggest problem is customers having a socket fitted on the wall, almost always EXACTLY where the bracket needs to go.

If you look at the links I posted and also wander around the B-Tech website you can find several brackets that would do the job. And with the adapter rails can accept 300x200 easily.

Basically find a 200x200 mount that takes your fancy, add the adapter rails and job done.

Thanks guys, I will see what I can find