Motorola V3 POP3 Email Pay Monthly settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
Please note all steps must be completed to ensure the settings are correctly configured. Please check the software version on the handset before proceeding..
The phone has a 4-way directional ‘Navi’ key and 1 softkey above (menu) and 2 softkeys to either side of this. The Navi key can also be pressed in to select options.
To check the software version.
Press the Menu button (directly above the Navi key).
Highlight ‘Settings’, use the Navi key to select.
Highlight ‘Phone Status’, use the Navi key to select.
Highlight ‘Other Information’, use the Navi key to select.
Highlight ‘S/W Version’, use the Navi key to select.
If the software version is anything other than R374_G_OE.40.3CR, proceed as below. If not the handset needs a software upgrade to use POP3. Should this be required you will need to contact Motorola on 08709010555. They will assist in the upgrade.
1. Press the Menu button (button directly above the Navi button).
2. Scroll to ‘Messages’ and press the Navi key to select.
3. Highlight ‘New Message’, and then press the Menu key.
4. Highlight ‘E-Mail Msg Setup’, then press Select (right softkey).
5. Highlight ‘ISP settings’ and select ‘change’ (right softkey).
6. Highlight ‘Connection Type’, use the Navi key to select. Highlight ‘GPRS’ and select (right softkey).
7. Highlight ‘APN address’ use the Navi key to select. Enter ‘mobile.o2.co.uk’ and press OK (right softkey).
8. Highlight ‘User name’ use the Navi key to select. Enter ‘o2web’ and press OK (right softkey).
9. Highlight ‘Password’ use the Navi Key to select. Enter ‘password’ and press OK (right softkey). Confirm the pass word and press OK (right softkey)
10. Highlight ‘DNS IP’, use the Navi key to select. Enter ‘193.113.200.200’, press OK (right softkey)
11. Select Back (left softkey).
12. Highlight ‘Email provider’, use the Navi key to select. Highlight ‘custom and press select (right softkey).
13. Highlight ‘Protocol’, use the Navi key to select. Highlight POP3 and select (right softkey).
14. Highlight ‘User ID’, use the Navi key to select. Enter your user name/login name with your Internet Service Provider (for O2 accounts enter full e-mail address) and press OK (right softkey).
15. Highlight ‘Password’, and then press the Navi key to select. Enter your/customer’s e-mail account password and press OK (right softkey). Confirm the password and press OK (right softkey).
16. Highlight ‘Sending host’, use the Navi key to select. Enter’smtp.o2.co.uk’, press OK (right softkey).
17. Ignore ‘Sending port’, leave at ‘25’.
18. Highlight ‘Receiving host’, use the Navi key to select. Enter ‘mail.o2.co.uk’, press OK (right softkey).
19. Ignore ‘Receiving port’, leave at ‘110’.
20. Highlight ‘Return address’, use the Navi key to select. Enter the full email address.
21. Highlight ‘Name’ use the Navi key to select. Enter the name as it is required to appear on emails.
22. Ignore ‘Cleanup’, leave as ‘None’.
23. Highlight ‘Save on Server’ use Navi key to select. Highlight ‘Yes’ and select (right softkey).
The remaining steps are not necessary to the operation of the POP3 service, only to the appearance of the messages and are included for completeness..
24. Ignore ‘Notification’, leave as ‘On’.
25. Ignore ‘Check new msgs’, leave as ‘No’.
26. Ignore ‘Hide fields’, leave blank.
27. Ignore ‘Auto signature’, leave blank.
28. Ignore ‘Security’, leave blank.
29. Ignore ‘Size restriction’, leave as ‘65535’.
Press left softkey 3 times to return to the standby menu.