just got this but I still cant get it to work, can you?
"Here is what I find out for you. The first account is the main account.
There is no indication that the other accounts are properly registered
so you need to somehow verify that you have set up all the accounts
properly. One way of doing this is to set each account as the first
account to verify the proper settings and making sure that it says ready
for call. Once done then you can transfer the account info to the second
account. The second or third accounts need to have a "prefix dial
string entry" This will let the ATA know which account you want to use.
The first account is the default and will not require a dial string.
You set up the prefix as such: <{prefix}:>
You must select a prefix that is not used as a possible dialing number
in the first account.
For example: If you set up prefix as such <{2:>, then to dial out
using the second account, you would dial the number 2 which would
indicate to the ATA that you are going to use account #2. But again,
you need to make sure that the no possible numbers dialed with account
#1 starts with a number 2.
Now one existing issue..You will also need to dial any other digit after the prefix
before the number, for now the ATA drops the first digit
of the phone number dialed.
For example: the dial prefix is "2" and the number you want to dial is
4803825.
You would dial 2 and then any other digit and then the number...2, 2,
4803825
I hope this helps"