Hello!

I have a flat screen TV and I bought it a wall bracket, however it came with no instructions (it was from eBay).

My dad does not know how to put it up, there are a lot of screws that he does not know what to do with.

I have taken a few photos to show you the bits, you can see them at:

www.adranix.co.uk/dsphotos or click here

He knows where the largest screws go but I dont think he knows where the others go, if anyone else has bought a bracket like this and could scan in some instructions or provide a link to some that would be great!

I could find nothing on Google.

Thank You, Adam

I'll have a go...

JPG 79 is the back plate that fixes on the wall, looks like you use jpg77 for this. 3 for the top, three for the bottom.

JPG 75 - The flat plate screws to the back of the display, be careful to use the correct length of screw, use a toothpick to judge the depth of hole. How many screws you will need will depend on how may holes you have in the back of the TV.

You should now be able to hook the TV onto the bracket on the wall. You have a lock screw at the bottom of each bar to secure the TV to the wall bracket.

The two bolts on the side of each bar are to enable to TV to tilt up and down.

Pretty sure I have covered everything......Get drilling.

^^^^^^^^^^^^^^ what he said , as for the toothpick method , good sound advice , if a screw does not tighten before going flush the STOP !!!!!!!! , the last thing you want to do is to force something