Panasonic TX-32LXD60 problem

Jason Bourne · 27-09-2007, 17:17

Hi all

On my Panny when I select and external input, be it AV1, AV2, HDMI etc, it comes up in the top left hand corner which one you are on .............permanently!

How the hell do I get it to be displayed for just a few seconds then go off?

Cheers

Nigel Goodwin · 27-09-2007, 17:45

Quote:

Originally Posted by Jason Bourne

Hi all

On my Panny when I select and external input, be it AV1, AV2, HDMI etc, it comes up in the top left hand corner which one you are on .............permanently!

How the hell do I get it to be displayed for just a few seconds then go off?

Presumably it's similar to a Sony set?, on which there's a button on the handset which turns it ON or OFF - on Sony's it's labelled with either 'i' or a TV screen with a '+' in the corner (or both).

It will be explained in the instruction book!.

Jason Bourne · 27-09-2007, 18:31

Quote:

Originally Posted by Nigel Goodwin

Presumably it's similar to a Sony set?, on which there's a button on the handset which turns it ON or OFF - on Sony's it's labelled with either 'i' or a TV screen with a '+' in the corner (or both).

It will be explained in the instruction book!.

Thanks for the reply, and you are partially correct. The "i" button does display and cancel on screen info, but only in "TV" mode. It has no effect when an external input is selected.

I've read the manual cover to cover and can't see anything on this.

http://techdocs.panasonic.co.uk/docs.../TQB0E0233.pdf

Nigel Goodwin · 27-09-2007, 21:45

Quote:

Originally Posted by Jason Bourne

Thanks for the reply, and you are partially correct. The "i" button does display and cancel on screen info, but only in "TV" mode. It has no effect when an external input is selected.

Does on Sony's!

Presumably Panasonic have a customer help line?, if you ring that it's likely to be a VERY FAQ.

skinj · 28-09-2007, 15:41

Press and hold the i button for about 3 second and the graphic should go once you let go after a few seconds.

Jason Bourne · 28-09-2007, 23:13

Quote:

Originally Posted by skinj

Press and hold the i button for about 3 second and the graphic should go once you let go after a few seconds.

Hi

I tried your suggestion, for 3 seconds, 5 seconds 10 seconds,etc, and it's still there....

Any other ideas?

Cheers

27-09-2007, 17:17	#1
Jason Bourne Forum Member Join Date: Aug 2007 Posts: 9	Panasonic TX-32LXD60 problem Hi all On my Panny when I select and external input, be it AV1, AV2, HDMI etc, it comes up in the top left hand corner which one you are on .............permanently! How the hell do I get it to be displayed for just a few seconds then go off? Cheers

27-09-2007, 17:45	#2
Nigel Goodwin Forum Member Join Date: Apr 2006 Location: North Derbyshire Posts: 41,789	Quote: Originally Posted by Jason Bourne Hi all On my Panny when I select and external input, be it AV1, AV2, HDMI etc, it comes up in the top left hand corner which one you are on .............permanently! How the hell do I get it to be displayed for just a few seconds then go off? Presumably it's similar to a Sony set?, on which there's a button on the handset which turns it ON or OFF - on Sony's it's labelled with either 'i' or a TV screen with a '+' in the corner (or both). It will be explained in the instruction book!.

27-09-2007, 18:31	#3
Jason Bourne Forum Member Join Date: Aug 2007 Posts: 9	Quote: Originally Posted by Nigel Goodwin Presumably it's similar to a Sony set?, on which there's a button on the handset which turns it ON or OFF - on Sony's it's labelled with either 'i' or a TV screen with a '+' in the corner (or both). It will be explained in the instruction book!. Thanks for the reply, and you are partially correct. The "i" button does display and cancel on screen info, but only in "TV" mode. It has no effect when an external input is selected. I've read the manual cover to cover and can't see anything on this. http://techdocs.panasonic.co.uk/docs.../TQB0E0233.pdf

27-09-2007, 21:45	#4
Nigel Goodwin Forum Member Join Date: Apr 2006 Location: North Derbyshire Posts: 41,789	Quote: Originally Posted by Jason Bourne Thanks for the reply, and you are partially correct. The "i" button does display and cancel on screen info, but only in "TV" mode. It has no effect when an external input is selected. Does on Sony's! Presumably Panasonic have a customer help line?, if you ring that it's likely to be a VERY FAQ.

28-09-2007, 15:41	#5
skinj Forum Member Join Date: Nov 2001 Posts: 3,206	Press and hold the i button for about 3 second and the graphic should go once you let go after a few seconds.

28-09-2007, 23:13	#6
Jason Bourne Forum Member Join Date: Aug 2007 Posts: 9	Quote: Originally Posted by skinj Press and hold the i button for about 3 second and the graphic should go once you let go after a few seconds. Hi I tried your suggestion, for 3 seconds, 5 seconds 10 seconds,etc, and it's still there.... Any other ideas? Cheers

DS Forums

Panasonic TX-32LXD60 problem