Does anyone know the remote codes to programme other remotes to use the Digihome box? ta. RM

I contacted One for All about this and they couldn't not guarantee that any of their remotes would work But suggested that these codes MIGHT work,

SAT 2034 and VCR 2078

However, they are not included in most remotes and you may need to send the remote away for an upgrade.

If you need a compatible replacement remote, you can get them from:

Charles Hyde
Prospect House
1 Halifax Way
Pocklington Industrial Estate
Pocklington
York
YO42 1NR

Tel: 0870 9909474

http://www.chsinteractive.co.uk/elec...ns-evesham.htm

I've not bought from these people but have been recommended by Hitachi.

Has anyone tried that remote? I would like to find a spare remote - I have a Wharfedale 250DTR which has a remote that looks the same as the ones for other T816 models such as the ones in Asda and so on. It has play pause etc buttons at the top, together with dedicated Library and Timers buttons. I think it's quite a nicely designed remote actually, but the one linked above looks more generic, and probably wouldn't have the dedicated Library key etc....or does it?

If you click on the picture, it gets bigger and you can see the LIB and TIMERs buttons about two thirds of the way down next to PLAY etc.

So does anyone have a One For All remote, and does it work with the PVR80? Which code worked for you? I should imagine that all buttons can be mapped to the one for all through learning (if you still have the original remote).

I have a remote for the TV (on/off, volume, AV), a remote for DVD and a remote for PVR. I would quite like to have one remote for all of these. The one for alls also have "punch through" where the volume is always controlled by the TV, no matter what mode you are in.

I have a a URC10 and that worked once the remote was updated. Mine was faulty, and so was replaced. The codes are mentioned here http://www.digitalspy.co.uk/forums/s...d.php?t=761529.

Thanks, I just bought a Kameleon URC8060 on eBay, and it should work fine! I guess most budget universal remotes that can't be updated are unlikely to work.