Originally Posted by Graham UK:
“about 29m 45-55s for half hour programmes and 59m 45-55s for one hour programmes. (Yes I have noticed that).
Tried my first manual recording last night through the timer which worked fine, but could not find away of naming the recording, it just gives the name of channal. I Must be missing something as I can't see an option in the menu to name a program.”
Did any of the recordings that didn't work overlap with the one that did? IIRC, others with T825 v2.7 units have reported that sometimes recordings don't get triggered when the unit is supposed to be recording two things at the same time. This never really was a problem with previous software and the T816. That said, I my T816 did go through a stage of missing recordings a couple of weeks ago - the recordings were all set from the EPG and were supposed to record programmes on Five and Virgin 1. On some of the occasions I was in to observe the HDD spinning up at the record start times, only for it spin down again a minute or so later without recording anything. I then turned the TV and PVR on and went to the EPG to find the programme was still underlined in red, yet it wasn't recording. The now/next info on the channel was showning the correct programme. This may have been down to the v4.7 revision of the software that I was testing, which seems to share many of the flaws of the T825 software.
Generally though, I should emphasize at how unusual it is for a Vestel T810 or T816 to miss a recording - despite their quirks and bugs, the one thing that could be said was that they were almost bullet proof when it came to recording (unlike my old Sagem that only recorded things that I wanted when it felt like it). Unfortunately, it seems the T825 software is not so reliable in this regard, which has to be the worst flaw of a PVR. I'll be sending an e-mail to Vestel regarding the T825, essentially suggesting they pull their finger out, because the software really is well below par at the moment.