My model doesn't seem to be asking me if I want to set a series link, when I go into set it for a recording anymore?
Also all my previous series link reservations have disappeared.
Any idea what could have happened? Have I inadvertently pressed something?

You may have enabled auto padding by accident. Go to Menu > Record and check that Recording's Start Time and Recording's End Time are both set to On Time.

You are a life saver!
Thanks very much

I think you might have to reset your series links, I can't remember if they reset themselves or not when you remove auto padding.

I had a look on the schedule and there was nothing in there, so I just set them again.
Thanks again for your help.

I was wondering if anyone could help me with a problem

I have recently purchased the Humax 9200T and can't set programmes to series link, can someone let me know how it is done, I am probably being thick but can't seem to work it out

Thanks in advance

Winnielong

You need to have software version 1.00.20 or 1.00.21 and the pre and post padding must be set to zero. What then happens is that when you make a program reservation and series link is available a dialog appears to ask whether you want to record the whole series or only one episode.

Why is it that when I set up ER as a series link on Channel 4, it also recorded every episode repeat on More 4 as well?

Why is it that when I set up ER as a series link on Channel 4, it also recorded every episode repeat on More 4 as well?

If your software version is not 1.00.21 then you can get it from tomorrow until the 31st Over The Air.

thanks so much sorted it your'e a star