[Danny1979]

Hi All

Im having the following fault occurring intermittently:-

The sequence from standby using the controller seems to be :-

1. TV (as is normal) shows solid red light in bottom left when on standby.

2. Upon pressing the standby button on controller, the red solid light will start flashing quickly red.

3. The quickly flashing red light will then change to flashing green as normal but then (when the fault occurs) the screen turns on but then immediately switches off leaving a slowly flashing red light.

Has any one had this prob and has an engineer ever diagnosed the source of the problem as i am out of warranty?

Thanks for your help in advance

Dan

[Nigel Goodwin]

Once it's flashing does it flash a certain number of times, stop briefly, then flash the same number of times again?.

If so it's an error code, and you need a Panasonic LCD/Plasma service agent to tell you what it means.

[mints]

Quote:

Originally Posted by Danny1979

Hi All

Im having the following fault occurring intermittently:-

The sequence from standby using the controller seems to be :-

1. TV (as is normal) shows solid red light in bottom left when on standby.

2. Upon pressing the standby button on controller, the red solid light will start flashing quickly red.

3. The quickly flashing red light will then change to flashing green as normal but then (when the fault occurs) the screen turns on but then immediately switches off leaving a slowly flashing red light.

Has any one had this prob and has an engineer ever diagnosed the source of the problem as i am out of warranty?

Thanks for your help in advance

Dan

I have a 32lmd70 and it has done something along these lines a few times

I just turn it off and on again and its ok

[RAY VON]

Yep, mine does that too. Normally power it off & back on again using the switch at the top of the set then all's fine....till next time!