• TV
  • MOVIES
  • MUSIC
  • SHOWBIZ
  • SOAPS
  • GAMING
  • TECH
  • FORUMS
  • Follow
    • Follow
    • facebook
    • twitter
    • google+
    • instagram
    • youtube
Hearst Corporation
  • TV
  • MOVIES
  • MUSIC
  • SHOWBIZ
  • SOAPS
  • GAMING
  • TECH
  • FORUMS
Forums
  • Register
  • Login
  • Forums
  • Entertainment Services
  • Satellite
  • Freesat+ Recorders
Humax Foxsat DD 5.1 sound problem?
beberex
04-03-2009
Hi guys.

I`m using a Denon AV amp for my sound via the s/pdif toslink cable. Whenever a program is broadcasted with DD 5.1 (only BBC1 HD and Luxe HD at the moment) the volume can`t be controlled using the Humax remote whereas with all other progs it works fine.

I still get the volume window displayed but altering the volume has no effect until it reaches zero when it disappears alltogether. (Makes sense).

This might have been flagged elsewhere but can`t find it.

It`s not a big issue but if we`re watching something and switch to say a BBC HD program the initial blast of sound scares the s**t out of us.

It seems that when a HD prog is broadcast with DD 5.1 audio there is no control over the sound with the remote.
u006852
04-03-2009
Hi

I have the same, it seems to be a "feature" of the humax.

However having said that, it may be much more difficult for the box to change the volume of the dolby stream than to change the PCM (mpeg) sound on SD channels. Hence it is not done.

For best audio quality I would leave the humax volume on max and change volume on your amp.
tonyk
04-03-2009
I have the same problem, hoping that an update will fix design problem. When you change to HD prog using amp it is way out of proportion to SD sound.
Bob_Cat
04-03-2009
When the broadcaster sends Dolby 5.1 the STB must pass-through the stream, if the product attempted to decode, volume change and recode you could loose audio quality. It might be possible to change the stream in-line to change the volume base-line but again this would be messing with the stream in undesirable ways.

Digital audio outputs should always be output at the baseline reference level, changing digital volume levels is undesirable. I don't really think we should be doing it on the PCM version, but there are practicalities with respect to that.

But once again, "optical out" is designed to be as much of a pass-through of the original as possible. It is why you have the choice in purchasing whatever piece of AV equipment you like.
b33k34
04-03-2009
Originally Posted by Bob_Cat:
“
Digital audio outputs should always be output at the baseline reference level, changing digital volume levels is undesirable. I don't really think we should be doing it on the PCM version, but there are practicalities with respect to that.”

I've always found it annoying having a 'volume control' on set top boxes as it inevitably ends up with a user lowering the volume on the STB and getting a shock when switching to another input. Mute is ok but Volume makes no sense - the remote volume control should control the TV or AMP volume not the STB.

As a feature request - how about a setting to disable the STB volume?
grahamlthompson
04-03-2009
Originally Posted by beberex:
“Hi guys.

I`m using a Denon AV amp for my sound via the s/pdif toslink cable. Whenever a program is broadcasted with DD 5.1 (only BBC1 HD and Luxe HD at the moment) the volume can`t be controlled using the Humax remote whereas with all other progs it works fine.

I still get the volume window displayed but altering the volume has no effect until it reaches zero when it disappears alltogether. (Makes sense).

This might have been flagged elsewhere but can`t find it.

It`s not a big issue but if we`re watching something and switch to say a BBC HD program the initial blast of sound scares the s**t out of us.

It seems that when a HD prog is broadcast with DD 5.1 audio there is no control over the sound with the remote.”

Set the volume on your amp to a comfortable level watching BBC HD, change to a sd channel and adjust the foxsat volume to achieve the same level as on HD. No more burst eardrums
Geoff_W
04-03-2009
Originally Posted by grahamlthompson:
“Set the volume on your amp to a comfortable level watching BBC HD, change to a sd channel and adjust the foxsat volume to achieve the same level as on HD. No more burst eardrums ”

That doesn't help when you have to turn up the volume a large amount on BBC HD programmes and then the damned continuity announcer comes on and blasts you out of your seat!

Also, does anyone else find the BBC HD announcer (female) has a very sibilant voice (or else is too closely miked)?

Geoff
b33k34
04-03-2009
Originally Posted by Bob_Cat:
“
Digital audio outputs should always be output at the baseline reference level, changing digital volume levels is undesirable. I don't really think we should be doing it on the PCM version, but there are practicalities with respect to that.”

I've always found it annoying having a 'volume control' on set top boxes as it inevitably ends up with a user lowering the volume on the STB and getting a shock when switching to another input. Mute is ok but Volume makes no sense - the remote volume control should control the TV or AMP volume not the STB.

As a feature request - how about a setting to disable the STB volume?
White-Knight
04-03-2009
Originally Posted by b33k34:
“I've always found it annoying having a 'volume control' on set top boxes as it inevitably ends up with a user lowering the volume on the STB and getting a shock when switching to another input. Mute is ok but Volume makes no sense - the remote volume control should control the TV or AMP volume not the STB.

As a feature request - how about a setting to disable the STB volume?”

You've posted this twice now. However, I agree.

The volume is far easier to manage by keeping the STB Vol at 100% and adjusting volume on the TV or amp.

I too find the STB volume control annoying simply because I always risk catching it when using other functions on the remote.

The mute button on the other hand is very useful.
tonyk
04-03-2009
You do not have any option than to keep volume at max if you are using an amp for audio, as the first person said on HD nothing happens until you get to zero when the audio is lost altogether.
u006852
04-03-2009
Originally Posted by Geoff_W:
“That doesn't help when you have to turn up the volume a large amount on BBC HD programmes and then the damned continuity announcer comes on and blasts you out of your seat!

Also, does anyone else find the BBC HD announcer (female) has a very sibilant voice (or else is too closely miked)?

Geoff”

No, never heard it be sibilant, but yes it is sometimes way too loud compared to the program that preceeded the announcement.

However I have never understood why the announcement is mixed across left, centre and right speakers. Why not just centre?
theShadowman
04-03-2009
How about this for an odd problem of a similar type. I listen to many programmes through wireless earphones, the volume of which is set either by the phones or by a setting on my Panasonic TV. This works well until my wife changes the volume control on the Humax and blows my head off. For some reason the Humax volume control takes over from the TV & phones setting. Is there anyway I can stop the Humax volume controlling the earphone level.
Caz42
04-03-2009
Originally Posted by Geoff_W:
“Also, does anyone else find the BBC HD announcer (female) has a very sibilant voice (or else is too closely miked)?Geoff”

When I find my dictionary I will reply to this post
GaseousClay
04-03-2009
Originally Posted by Caz42:
“When I find my dictionary I will reply to this post ”

^^^ he said in a hiss
VIEW DESKTOP SITE TOP

JOIN US HERE

  • Facebook
  • Twitter

Hearst Corporation

Hearst Corporation

DIGITAL SPY, PART OF THE HEARST UK ENTERTAINMENT NETWORK

© 2015 Hearst Magazines UK is the trading name of the National Magazine Company Ltd, 72 Broadwick Street, London, W1F 9EP. Registered in England 112955. All rights reserved.

  • Terms & Conditions
  • Privacy Policy
  • Cookie Policy
  • Complaints
  • Site Map