Options
RAI UNO on Astra
richie wild
Posts: 9,895
Forum Member
✭
hi, can anyone help me with the specifics of Rai Uno on Astra please? the details given by Lyngsat and What Satellite don't bring it up - it was with Sky News and stuff, wasn't it?
thanks in anticipation.
thanks in anticipation.
0
Comments
Just try an unrestricted Scan and all will be well (You may even be able to watch, when the current programme has finished!)
11568 sr 22000 fec 5/6 vertical.
Is that Humax acting up in any other way?
Problems with other TPs or Sats?
Post drafted nearly 3 hours ago - DS up spout all pm
All I had in the back of my mind was a problem with the LNB settings, but if the issue is confined to one TP, then that doesn't make sense - particulary as the frequency difference is 29MHz, which rings no bells at all.
rai uno is at
11566 V
22000
5/6 fec
astra 1
on my humax hd receiver
cheers
Have been trying everything to get Italian channels as the wife is Italian, but I can't put a dish up where I live.
Am currently using overseatv to stream the channels with some success..
cheers again.
1) astra1, lnb freq 225, 22khz enablesd
4)astra1, lnb freq universal, 22knz auto
using setting 4, i get the TVP package, using 2 (which is for hotbird!!) i get something else.
11566 v 22000 5/6 only gives a signal level on ant setting 1, but gives the channels for 11597.
any ideas anyone?
I find that if I select the correct "Universal" setting, the Box greys out the individual switches eg 22KHz and everything works fine. One of my Boxes has "Universal 1" and "Universal 2". Just play until it works. I'm positive this is where your problem lies - Incorrect switch setting giving an unwanted frequency shift
All your Satellites should be set to the same "Universal" choice - assuming your LNB is a Universal, of course!
Even if you change a setting, you can always change it back if you're not happpy.
That channel comes up as RAI1 on my Homecaste receiver. Not sure if this is of any use to the originator of this thread.
WH
Did you try deleting the transponder,and then adding it again,and then try scanning.
i've had digital sat from Astra for 9 years, but have never come across a problem like this.
I am missing 6 transponders from Astra 1,for some strange reason,no problems with the rest.
If you check out the Humax website,you should be able to download the manual,for your specific model.
You just simply need to delete the transponder,that Rai Uno is on,and then manually add it again to the transponder list.